Type in the full discussion title or a part of it.
Discussion Title Created date
AVRDUDE GUI directory
I can't seem to find the GUI program for Avrdude. Is this program not included with the Win-Avr package anymore?
Thursday, 22 January 2009 - 20:58
Need help with PWM using Atiny13
Ok GCC guru's. My code works using the AVR Studio simulator, but when I upload the program to the device, I do not see a PWM output on the pin. I am using the default fuse...
Tuesday, 28 October 2008 - 01:56
Butterfly question
Here at work, we have a number of Butterfles that are not working, (Cannot program them using the jtagice MKII programmer. I am wondering if the students might have configured the...
Thursday, 27 March 2008 - 13:59
TWI question
What pins do I use for the clock and data lines. I am using an atmega8 device?
Saturday, 10 March 2007 - 03:09
Anyone know of good asm library
Like for LCD, one wire, two wire, and such. I am all for not reinventing the wheel. :D
Saturday, 3 March 2007 - 03:22
Help with RS-232 comms
The board being used is a Sparkfun Tiny2313 board with a 10 MHZ xtal. I programmed the following code into the device that is directly out the data book. I'm using Hyper-Terminal...
Thursday, 3 August 2006 - 04:18
Serial comms with the Tiny2313
Is there a good example for using simple non-interrupt serial comms.
Monday, 31 July 2006 - 03:47
Consulting question
For those of you who are in business for yourself, How would I get started. I have 20 years of experience. I can program microcontrollers and desktop PC's. Any suggestions would...
Monday, 24 July 2006 - 14:05
Tiny13 circuit help
Hi all, I have designed a circuit that senses when brakes are applied, and then modulates the brake light for about 250ms before it turns the brake light on steady. The circuit...
Saturday, 22 July 2006 - 19:38
Can I use a USB programmer
- with Studio? Have been away for about a month due to moving to NC. Getting settled in and want to continue a project. Thanks. Ed
Tuesday, 27 June 2006 - 16:18
MacAVR?
Is there equivalent software for Mac OS X?
Monday, 15 May 2006 - 20:39
WinAVR and Attiny13
I can't control an I/O pin with WinAVR C. When I use CodeVision C there is no problem. I looked in the winavr manual and the tiny13 is supported. What gives??? My makefile is...
Monday, 20 March 2006 - 06:23

Pages