Post Created date
AVR32 Buildroot beginner question
Thomas, you may search at http://www.mikrocontroller.net/f... for the keyword "grasshopper". There is a lot of information avalable.
Friday, 20 April 2012 - 11:15
(Outdated) Script for building AVR-GCC 4.5.1 on Linux
If you run into problems while patching mpfr :arrow: build-avr-gcc-4.3.4-binutils-2.20-libc-1.7.1-insight6.8-1a-dude-5.11.1-insight-patch.zip has mpfr-3.0.1 in the package-...
Tuesday, 6 December 2011 - 16:49
AVR Studio 4.18 and AVR Dragon
I have seen similar effects with a specific USB cable.
Wednesday, 8 September 2010 - 05:37
Getting two diff results when using 'strcmp' in diff code
:idea: What about using strncmp and avoid strip_newline completely. strncmp ( cmd, "quit", 4 ) ); /* Or even better */ strncmp_P ( cmd, PSTR("motor"), 5 ) );
Tuesday, 3 August 2010 - 05:47
Problem with printf( "%" "f", myDoubleVa
From the AVR-LIBC documentation (http://www.nongnu.org/avr-libc/user-manual/group__avr__stdio.html) Quote: Since the full implementation of all the mentioned features becomes...
Friday, 7 May 2010 - 07:18
How do I disable router on ATNGW100
:idea: Have a look at section "IP Specific Settings" in http://linuxgazette.net/77/lechnyr.html
Wednesday, 28 April 2010 - 05:35
Do interrupts get interrupted?
My answer is: It depends on your AVR controller. = legacy and Mega AVR : See answer above. = XMega AVR : Yes. There are tree interrupt priority levels. Any higher priority level...
Friday, 19 March 2010 - 09:53
Webserver config on ATNGW100
https://www.avrfreaks.net/wiki/index.php/Documentation:NGW/ConnectingToHomeNetwork should give you an idea what to change
Wednesday, 24 February 2010 - 19:33
Arithmetic shift right >8
Since the AVR does not have a barrel shifter you should reduce the numer of shift operations . long int x = (CONST_FACTOR << 1), y = (0 << 1), z = theta; for(...
Wednesday, 24 February 2010 - 09:49
(Outdated) Script for building AVR-GCC 4.5.1 on Linux
@Bingo600 There is a little bug that does not appear in WinAVr 20100110. Compiling the demo for Appnote AVR1300 (ATXmega128A1) the generated code for the ISR entry sequence has a...
Tuesday, 2 February 2010 - 18:28
OK, too difficult for me - moving the Linux console
I may be totally wrong... Provided that you are able to control the bootargs that u-boot is transferring to the kernel. My idea is to scan the boot_command_line or...
Wednesday, 22 July 2009 - 05:51
change to spec of i2c_board_info
static struct i2c_board_info i2c_info[] = { { I2C_BOARD_INFO("pcf8583", 0x50), }, }; This works for me
Thursday, 18 June 2009 - 06:12

Pages