Type in the full discussion title or a part of it.
Discussion Title Created date
crimper for molex type contacts
I am using contacts like this, http://search.digikey.com/script... I have a few crimpers with a die like this, http://www.skygeek.com/ats-e300-... Those dies work for the part of...
Sunday, 20 December 2009 - 02:47
Windows CE GPS, Platform builder
This is along shot. There are many Chinese no name GPS units based on Windows CE 4.2/5.0 . The most popular ones are based on the Sirf Atlas 3 processor. I want to customize that...
Friday, 9 October 2009 - 02:01
56 pin QFN SMD stencil
Hi, I only need a stencil for a 56 pin QFN device I am using, I am wondering is there some place I can buy a stencil for cheap. I know I can get a custom stencil made, but I am...
Friday, 2 October 2009 - 01:33
USB PID VID, need to buy ~20 PID
Hi, There used to be places on the net to buy blocks of PIDs, but they are no longer selling them because the USB.org threatened to eat their kids. Does anyone know if there is a...
Friday, 28 August 2009 - 03:43
uC with programmable logic, TCP/IP?
Hi, I am using another micro with a small FPGA/CPLD onboard. I want to do TCP/IP without external chips. I really do not know anything about TCP/IP. I want to do the stack on the...
Tuesday, 25 August 2009 - 16:22
OPAMP buffer, diode protection
Hi, I have an MCU that has a DAC, the DAC is supposed to drive an external device, I am looking to protect the MCU from possible damage due to ESD or faults the external device...
Saturday, 20 June 2009 - 00:54
soldering 0402 components.
In my current design I decided to challenge myself and put about 2 dozen 0402 components on a design that was mostly using 0805 components. I found 0402 to be a total b*tch to...
Friday, 19 June 2009 - 05:01
FFC, flat flex cable, where to buy?
Hi, I am looking for a 15 conductor FFC with 1.27mm pitch. I have looked on digikey and mouser, but they do not carry what I need in stock, and the price is very high. Is there a...
Thursday, 18 June 2009 - 20:59
character lcd, backlight powered by 5v through resistor
Hi, The specs of the backlight on my 2x10 character LCD is ~20ma @ ~3.5v. My system runs on 5v and I do not want to put in another regulator just for the backlight. 5v->75ohm...
Wednesday, 17 June 2009 - 02:46
looking for 20 pin molex connector, same as PC ATX connector
Hi, I am looking for cheap yet high quality connectors. I figured since there is a large economy of scale behind standard 20 pin ATX connectors used on PCs for supplying power to...
Thursday, 11 June 2009 - 03:29
Ethernet type cable but much thicker gauge
Hi, I am looking for cabling for one of my products. Ideally I want a cable with the following characteristics: -multistranded -6 conductor -each conduct is lower than 22 AWG -...
Sunday, 10 May 2009 - 23:38
Using high speed PWM to create a DC-DC stepdown regulator
Hi, I need a DC-Dc switching stepdown converter, whose output voltage can be controlled by a microcontroller. I am not sure if there are cheap off the shelf switching ICs that can...
Thursday, 7 May 2009 - 05:25

Pages