Post Created date
Software for CPLD design?
I used WinCupl years ago and found a copy but it wouldn't run on Win10.  Looking for an alternative, I found a fellow that wrote a new IDE that uses the Atmel (Logical...
Thursday, 8 April 2021 - 11:07
pollForTools times out after USB usage between MCU and computer
In my case, I discovered that, since the LUFA demos use the Atmel VID #, the backend agent appears to 'hang' as described during its polling operation. The agent must think that...
Tuesday, 9 March 2021 - 11:22
pollForTools times out after USB usage between MCU and computer
Hi - I understand that this question was posted about a year ago, with no response. Just recently, while testing one of the LUFA USB stack demo apps, this same issue is occurring...
Sunday, 7 March 2021 - 00:00
LUFA Extension - Broken under later versions of Studio 7?
Thanks for this information.  I will update my version per your instructions. Take care - Jim
Sunday, 14 February 2021 - 22:32
LUFA Extension - Broken under later versions of Studio 7?
Thank you... that was the problem.  That turned out much easier than anticipated. Take care - Jim
Sunday, 14 February 2021 - 16:05
Attiny416 issue - unsure if really an issue
Now I know.  Thanks for the help. Jim
Tuesday, 6 October 2020 - 20:18
Attiny416 issue - unsure if really an issue
OK - after doing some reading, I see that accessing the CCMP which is a 16bit register uses a TEMP register so that the both the H and L values are written simultaneously. ...
Tuesday, 6 October 2020 - 17:28
Debounce improvements / balance
  I am submitting the state machine code that I came up with years ago.  This state machine will debounce both the key press and key release.  I typically insert it...
Monday, 28 September 2020 - 16:49
ATtiny416/816 Manually Trigger SPI interrupt
curtvm wrote:DREIE   Hmmm - So enabling this interrupt should immediately force the interrupt to fire.  Yes, this should work... I don't yet have working hardware so...
Saturday, 29 August 2020 - 18:49
Avr-Size Question - Still confused
clawson wrote:I'm a luddite. I would objcopy the hex to bin then look at the size of that. That's the number of flash bytes it will use!   Ha!  I see myself in the same...
Thursday, 23 April 2020 - 19:54
Avr-Size Question - Still confused
clawson wrote: BTW I  guess you already know about avr-objdump -Pmem-usage filename.elfThis was developed by Atmel as a "better" solution than avr-size (even the -C option...
Thursday, 23 April 2020 - 19:24
Avr-Size Question - Still confused
avrcandies wrote: Are you being efficient with your code and any text?  It's very easy to get wasteful---just try a printf without realizing the impact.   I...
Thursday, 23 April 2020 - 18:48

Pages