Post Created date
public key binary signing
Quote:www.emsign.nl Does anybody know the reason, why the download procedure is so circumstantial ? Is it due to crypto export regulations ? Simple because I have made the...
Thursday, 10 June 2010 - 16:17
public key binary signing
Clawson, RSA on the AVR can be done As it is a much better processor then you think :lol: , And it only uses 690 Bytes, Depending on how you will construct your bootloader it can...
Thursday, 10 June 2010 - 05:16
Mass producing / Mass programming
Normally you will give the binary file or ELF file that also has the fuse setting in it for programming. But if you do not trust your manufacture then go some ware else. As you...
Friday, 2 April 2010 - 08:32
Attiny13 edge triggered interrupt wake-up from Power Down
I have a project in the project place that uses the wakup. Nikon IR release and automatic delay button https://www.avrfreaks.net/index.php?module=Freaks%20Academy&func=...
Saturday, 5 September 2009 - 19:17
AVR dev board with MMC/SD and Ethernet (ENC2860)
This is my DIY project. I had planed to make it for the Xmega but I still haven’t managed to get some. And this is based on the Mege644. I have the project form Roland Riegel's up...
Thursday, 15 January 2009 - 09:04
Servo Control with ATTINY13
have a look at my project in the academy always a good place to look :lol: . look at the file ServoControl.doc https://www.avrfreaks.net/index.php?module=Freaks%20Academy&...
Sunday, 11 January 2009 - 11:03
How to convert voltage with simple components?
You can also have a look in dropping the AVR voltage from 5 to 3.3 volt, Some diode after the regulator will do the trick. But most AVR’s will not run on full speed at 3.3 volt
Sunday, 31 August 2008 - 10:10
des/aes bootloaders revisited
Well on the subject of DES or AES for a bootloader. The issue of the bootloder is that it is as small as possible. And for des decrypt I will need 1780 bytes, and for AES decrypt...
Sunday, 31 August 2008 - 10:03
SPI Ethernet
you can look at the folowing link This is a ENC28J60 and a AVR http://tuxgraphics.org/
Thursday, 14 August 2008 - 22:13
USART in attiny13
I have put two projects in the academy https://www.avrfreaks.net/index.php?module=Freaks%20Academy&func=viewItem&item_type=project&item_id=912 https://www.avrfreaks....
Friday, 9 May 2008 - 21:29
Key storage with Encryption
I have just put my version of the AES and skipjack in the AVRCryptoLib https://www.avrfreaks.net/index.p...
Sunday, 13 April 2008 - 17:17
AVR Microcontroller with 2+ RS232 lines
You can also make a software uart if your baudrate is not to hi. but 9600 baud you can do, and that is including 8 times over sampling (interrupt every 13 uS or every 208...
Thursday, 13 September 2007 - 20:51

Pages