Discussion Title | Created date |
---|---|
ATXmega16A4 DAC channels not independently This is my first time using the ATXMega 16A4 DAC in dual channel mode and I'm having issues I solved by changing the TIMCTRL register. I don't really understand the description of... |
Saturday, 26 March 2011 - 05:20 |
Oscilloscope Opinions? I have been using Tek scopes since college. But now, it's time for me to purchase a scope for myself and there are several good players out there that I am just not familiar with... |
Friday, 19 November 2010 - 16:51 |
Picoest pico power device? Which avr is the lowest power? I have an application where I need to run off a watch battery and before I start scouring all the data sheets, I thought I would ask here first. |
Monday, 16 November 2009 - 16:05 |
Modbus Bootloader? I searched around cause I know I've seen this discussion before. Now I have an application where I could use the help. How do you allocate the RAM used by the boot loader in the... |
Friday, 28 August 2009 - 02:15 |
Finding a peak in data Here is a graph of 37 data points taken once every 5 minutes. I'm trying to find the point where the slope goes negative after the peak. This is easy when you have all the data... |
Wednesday, 6 May 2009 - 05:50 |
Adequate Encryption? Is there a way to test your encryption method? I know there are levels of protection, and I'm not real interested in complete lock out. I just want to make it impractical to... |
Thursday, 30 April 2009 - 18:24 |
Hybrid switching/linear regulator? I have a circuit with 24V input that I need 5V at about 100mA. Using a standard linear regulator, I can get the volts and little current I need to run my mega48. But, I have a... |
Wednesday, 29 April 2009 - 05:22 |
Which AVR do you prefer? I'm curious as to the AVR selection process of others. I know the obvious answer is "It Depends on the application." But, which one part is your starting point? Which part is... |
Friday, 24 April 2009 - 16:21 |
Differential A/D converter Is there a list of AVRs that have a differential A/D? I currently have a sensor using the ATTINY24, but the I2C interface is giving me grief. I was wanting to try a part with... |
Monday, 20 April 2009 - 14:34 |
New LCD Development board I have a source for a small (1.5") very inexpensive 96X64 LCD module. It requires a PCB to mount because of the zebra type connector. I'm considering making a development board... |
Sunday, 19 April 2009 - 18:44 |
Potentiometer DIP switch? I have an AVR project where most all my I/O is used up. But, I still need to add an address selector like a BCD or hex switch. I have an available A/D channel and was thinking... |
Saturday, 21 March 2009 - 18:15 |
Flash Corruption over time? I have several designs that sell a couple hundred a month. Mostly Mega48, some Tiny 26 and Tiny 261. Once in a while I get a customer describing very flaky operation. They send... |
Tuesday, 3 March 2009 - 23:49 |