atmega64 with Arduino IDE code This core can be installed in the Arduino IDE and will provide support for the ATMega64.
https://github.com/MCUdude/MegaCore
AVRISPMk2 out of production? They are in stock at the Atmel store.
http://store.atmel.com/PartDetail.aspx?q=p:10500054#
Thursday, 5 February 2015 - 05:41
Where can I download the AVRTOOLBOX Use this command to anonymously check out the latest project source code:
Non-members may check out a read-only working copy anonymously over HTTP.
svn checkout http://avrtoolbox....
Thursday, 1 January 2015 - 03:13
Optiboot on non-Arduino Mega328? optiboot_atmega328.hex is the Uno bootloader.
avrdude -v -v -v -v -patmega328p -c<PROGRAMMER> -P<PORT> -b<BAUDRATE> -D -V -Uflash:w:optiboot_atmega328.hex:i
If...
atmega32u4 au new chip I think that chip has a DFU bootloader.
See here for info: http://www.atmel.com/Images/doc7...
You can download the Arduino IDE and use it to install the Arduino bootloader. Or...
Friday, 21 February 2014 - 04:26
LUFA based AVRISP-MKII doesn't work with avrdude 6.0.1 I have a USBTINY MKII programmer that seems to work with avrdude 6.0.1, on Linux, without issue. The LUFA image was furnished by the seller (Tom Light) so I don't know the details...
Friday, 6 December 2013 - 22:03
Replace ATMega16U2 with ATMega328? The 16u2 chip on the Uno R3 board is used as the USB to TTL interface. The 328 is still the main mcu. The Arduino website has information about that board, have a look. http://...
AVR Programming in Arch Linux - How is it possible? Buy a programmer that works with Linux.
USBasp, from China, ~$5 USD delivered -- avrdude will crab about old software.
a) ignore the crabbing.
b) buy two of them and then use...
This core can be installed in the Arduino IDE and will provide support for the ATMega64. https://github.com/MCUdude/MegaCore
You can try: http://www.pjrc.com/teensy/td_li...
They are in stock at the Atmel store. http://store.atmel.com/PartDetail.aspx?q=p:10500054#
Use this command to anonymously check out the latest project source code: Non-members may check out a read-only working copy anonymously over HTTP. svn checkout http://avrtoolbox....
optiboot_atmega328.hex is the Uno bootloader. avrdude -v -v -v -v -patmega328p -c<PROGRAMMER> -P<PORT> -b<BAUDRATE> -D -V -Uflash:w:optiboot_atmega328.hex:i If...
The Atmega128 is an 8 bit device. Choose another toolchain.
I think that chip has a DFU bootloader. See here for info: http://www.atmel.com/Images/doc7... You can download the Arduino IDE and use it to install the Arduino bootloader. Or...
I have a USBTINY MKII programmer that seems to work with avrdude 6.0.1, on Linux, without issue. The LUFA image was furnished by the seller (Tom Light) so I don't know the details...
The 16u2 chip on the Uno R3 board is used as the USB to TTL interface. The 328 is still the main mcu. The Arduino website has information about that board, have a look. http://...
Hi Jörg, good job. tf
Buy a programmer that works with Linux. USBasp, from China, ~$5 USD delivered -- avrdude will crab about old software. a) ignore the crabbing. b) buy two of them and then use...
Try adding a baud rate to your avrdude commands. Such as -b9600, -b19200, -b38400, -b57800, -b115200. Also try avrisp2 as the programmer name. tf