Post Created date
Undefined reference (pre-pro symbols in asm())
Ok, thank you. Its working now.
Saturday, 23 November 2019 - 18:27
Undefined reference (pre-pro symbols in asm())
Hi, not possible for timing and other reasons. I need direct access to some registers like the Z-pointer. As stated, the code example was just an example and not the actual code....
Friday, 22 November 2019 - 18:26
Undefined reference (pre-pro symbols in asm())
Hi, thanks for the replies.   @clawson: thanks a lot for the very detailed and informative post. It was very helpfull for any matter as also for my question.    I...
Friday, 22 November 2019 - 17:33
atsha204a newbie struggle
Thanks for the links! Exactly what I was looking for.    Also, I saw one of my pullups on the I2C was not soldered correctly and thus the reason the bus did not work...
Wednesday, 21 August 2019 - 08:10
Problem with xmega32e5 timer interrupt
@Torby: thank you, I did stupidly miss that... I presumed it gets cleared when the ISR gets called and that it is only necessary to clear it manually if only the flag is used as...
Thursday, 27 April 2017 - 16:01
Yet another bootloader question
Yes it was quite obvious, thanks for the reply. I just somehow didnt get it.  
Wednesday, 13 April 2016 - 07:25
Yet another bootloader question
Ok, thanks a lot! I thought the 0x1C00 already was the double and 0xE00 was the internal  
Tuesday, 12 April 2016 - 08:41
AVR Studio will not find AVRIPSmkII
It finally worked!!! Thank you so much!!!  Sorry i missed that post.
Saturday, 10 October 2015 - 09:03
AVR Studio will not find AVRIPSmkII
Hi,   I also have this problem since months now. I am using Studio 7(tried 4 and 6 previously), Win10 with JTAG ICE MK2 and have tried everything a dozen times. Clean...
Saturday, 10 October 2015 - 08:45
JTAG protocoll
Ok, now I understand. Once the device is reset it becomes a slave so there is only one master at each one time. And as long as all the /CS lines are kept high everything is fine...
Saturday, 3 August 2013 - 16:00
JTAG protocoll
Well the issue with the SPI would be a signal collision if the hardware SPI is used in the design itself to communicate with some other device. Then three SPI devices would be...
Saturday, 3 August 2013 - 13:17
JTAG protocoll
That is a very great tip! Thank you! I did not jet come upon that idea.
Saturday, 3 August 2013 - 12:15

Pages