Type in the full discussion title or a part of it.
Discussion Title Created date
thoughts on new "Atmel | Start" tool
so I just saw Atmel uploaded a video on their youtube page describing their new tool , which some of the more active members probably already knew about but im just wondering your...
Monday, 28 September 2015 - 13:47
How much low level knowledge is practical for a pro and non pro
was not sure where to place this topic. MODS feel free to move it.    Ive been debating taking an $1800 course from Doulos on software design for M3/M4 http://www.doulos...
Friday, 21 August 2015 - 15:48
i2c help on samd21
So i have been trying to communicate with an eeprom chip , 24LC256  and according to the datasheet for a samd21 on page 564  in the STATUS register bit 2  (...
Friday, 21 August 2015 - 05:12
Does Atmel studio make funny music sometimes?
either something fishy is going on or atmel studio makes funny clown music every once ins a while exactly when i press the "Start Without Debugging" button  it only last...
Sunday, 16 August 2015 - 05:34
Register access only working outside of my while(1)
So I finally got my Xplained 21 yesterday and have been playing with it mostly trying to understand the hardware abstraction  With my AVR microcontrollers I would start off...
Wednesday, 12 August 2015 - 02:24
Accidentally modified and save PORT.h
and now even when starting a new project i get the corrupt version , how do i go about restoring it?    i was snooping around trying to understand what happens under the...
Tuesday, 11 August 2015 - 02:15
Making a structure to access the PORT
ok so i am trying to make  structures to access different parts of the M0 , i tried it with the AVR and works just fine , defining bit fields for each member in the structure...
Friday, 7 August 2015 - 05:25
MK2 burned. USBtiny burned.
So there must be something fundamentally wronG with the board I made. As far as I understand the vcc pin on an isp connection is connected to the same source the uC is getting...
Sunday, 25 August 2013 - 16:56
mkii not reading 328p
just got my MK2 in the mail and once I plugged it in AS updated the firmware and now i am trying to set it up via the Tools>>Device Programming menu and it reads the target...
Thursday, 15 August 2013 - 19:08
sanity check ...
okay this has been driving me crazy since last night. its a very simple set up just for learning purposes a pot on ADC0/ PORTC pin 0 an led on OC0A/pwm pin 6 on portd basically...
Thursday, 8 August 2013 - 20:29