Post Created date
static library: undefined reference error ...
Thank you for your information.   I wrote "drivers" fro several hardware peripheral such as CAN--Controller, LED-Display, Motro-controller.   So, I found it useful to re...
Saturday, 10 February 2018 - 07:41
static library: undefined reference error ...
Shame on me ... I forgot to include the library  ....
Friday, 9 February 2018 - 08:26
Tool for setting up your µC ...
Over the years, priorities change :-)
Friday, 9 February 2018 - 08:23
Tool for setting up your µC ...
Anything else? Something Freeware or as part of Atmel Studio?   AVR I/O Designer is working - No question
Wednesday, 7 February 2018 - 10:49
Which is the best bootloader for a AT90CANxxx ?
Great answer ! You helped me a lot.   Are you an expert ?
Tuesday, 10 February 2015 - 20:45
Wrong line highlighted while debugging
Yes. This was my first idea, also.   Normally I use -O1 as I was warned to avoid -O0 under all circumstances. But no change
Tuesday, 23 December 2014 - 06:06
Problem with Atmel Studio 6.2 compiler for AT90CAN128
I do many of my porjects with the AT90CANxxx family. Before the latest 6.x generation of AStudio, i was able to simulate the AT90CAN including the CAN mnailbox (no real hardware)...
Monday, 25 August 2014 - 13:22
Local backend agent disconnecting
I have the same problem. For me it began when I tried to watch memory areas. Do you have a solution ? I currently use a JTAGICE3, did not try my older AVRDragon and JTAGICE mkII
Sunday, 19 January 2014 - 11:33
debugging/watching classes in AS6.1
With JTAGICE3 I have the strange effect, that sometimes being inside the class coe, anything is 0. The correct values show up after exiting the class-code
Thursday, 2 January 2014 - 11:25
error compiling wdt_enable in c++
Seems that the problem comes from naggy, indeed. The code compiles okay, even the line is marked as error.
Thursday, 2 January 2014 - 11:21
library: is the correct device necessary ?
Okay. sounds better. I will try it.
Saturday, 28 December 2013 - 20:30
AT90CAN - sending Messages without IRQ
Okay. It was just an idea for a "fire-and-forget" technique. In fact, there would be normally interrupt-triggered transmissions. Would it be sufficient to first de-activate the...
Friday, 12 April 2013 - 09:08

Pages