Type in the full discussion title or a part of it.
Discussion Title Created date
Atmega8 fuse bit for 12Mhz crystal ?
Guys,   What's the fuse bit for Atmega8 using 12MHz crystal ? CLK0..3 = 1111 and COPT = 0 ?   Thanks a lot
Saturday, 8 August 2015 - 12:24
How to generate a pulse under 1uS ?
Guys,   How can I generate a pulse below 1uS, please have a look on the picture   I want to use WS2812 with ATMEGA128 port, for example PORTD0....and send a serial of...
Monday, 13 July 2015 - 14:11
Fast PWM Tiny13A ?
Guys,   I've been fiddling with FastPWM on Tiny13A to control a brightness of LED, but I haven't got it yet... Any setting or missing code here ?   TCCR0A|=(1<<...
Sunday, 12 July 2015 - 10:10
Guys,   Is there any ways to reset RSTDISBL on ATtiny13A ? I tried with slow clock programming on USBASP ...it didn't give any responses ? may be I put something wrongly ?...
Friday, 3 July 2015 - 10:32
Reading output from DS18B20 to USART on ATMEGA128 ?
Guys, I tried to read DS18B20... but the output in USART is Temperature : ? What should I change in this code ? thanks   double d = 0; int d1 = d; usart_init(...
Sunday, 28 June 2015 - 06:43
Guys,   Can I upload code to AT32UC3A ? http://www.atmel.com/devices/AT32UC3A0256.aspx?tab=tools   Or what's the debugger or uploader for this chip ?   Thanks
Wednesday, 6 May 2015 - 23:39
RTOS and atmega128 ?
Guys, I tried to port RTOS to atmega128 and I got this ; Error    3    undefined reference to `vPortYield'  on file tasks.c    Any...
Sunday, 26 April 2015 - 15:15
Atmega128 internet radio ?
Guys,   Is there a possibility to combine Atmega128,VS1003 and ENC28J60 as an internet radio ? Internet radio is sending a mp3 file, isn't it ?   Cheers
Friday, 10 April 2015 - 13:52
Fuse bit and flash ?
Guys,   I can't read my fuse bit on ATMEGA128 ? Is the chip broken already ? I try to write, it can be written but the content is not valid and the content of fuse bit are...
Wednesday, 8 April 2015 - 12:03
ON and OFF config ?
Guys,   I tried to make a config on EEPROM...but I can't change to OFF...   Here's the code :   char *chime[]={"ON","OFF"}; .. .. .. int chime_on; uint16_t...
Monday, 6 April 2015 - 09:35
How to display the first variable ?
Guys,   How can I display the first variable from this array ? I want to return to Sun after it's finished on Sat,   variable : char *weekday[]={"Sun","Mon","Tue","Wed...
Sunday, 5 April 2015 - 10:24
ADC single conversion ?
Guys, I tried to implement the datasheet : Page 235 ATMEGA128A datasheet ================ 23.4 Starting a Conversion A single conversion is started by writing a logical one to the...
Friday, 15 August 2014 - 20:54