Post Created date
Is it possible to use Arduino libraries on Atmega1281?
clawson wrote: I would have thought they are so similar (it really is just about number of pins (and ports)) that it's almost bound to work. Which peripheral libraries is it that...
Thursday, 6 August 2015 - 09:44
Can flash be written during run-time on Atmega328?
Brutte wrote:That is a badly posed question I think. You cannot write flash during compilation time as both operations are performed on different hardware. Of course you can write...
Saturday, 3 May 2014 - 09:55
What happens when EEPROM is written too many times?
Kartman wrote:The eeprom will get stuck bits - you wont be able to change them. The avr will still work. Can one still be able to read the EEPROM? Thanks.
Wednesday, 13 November 2013 - 07:19
Using atprogram to program Atmega328 binary and fuse
david.prentice wrote:As a general rule, you just type "atprogram" and you will get some helpful response. Other thing to try are: atprogram -? atprogram -h atprogram --help Then...
Tuesday, 12 November 2013 - 12:42
Are NiMh batteries safer than Lithium batteries?
I guess I had better stick to NiMh whenever possible for safety reasons.
Tuesday, 24 September 2013 - 13:28
Why wrong voltage will spoil a device but not wrong current?
JohanEkdahl wrote: Summing up: The supply supplies a certain voltage. The thing connected to the supply draws a certain current. Thank you very much for your time. Crystal clear...
Sunday, 22 September 2013 - 13:48
Why wrong voltage will spoil a device but not wrong current?
Thanks for taking the time to reply.
Sunday, 22 September 2013 - 13:37
Why wrong voltage will spoil a device but not wrong current?
John_A_Brown wrote:Mr Ohm can help you here. Look up Ohm's law and get some understanding of how electricity works. In a sentence, the voltage is the pump, so you can't actually "...
Sunday, 22 September 2013 - 13:23
Is atmega328 powerful enough to decode QRcode?
Thanks for the replies. I think the best solution is simply to use a QR code module.
Wednesday, 18 September 2013 - 06:11
Command-line programmer for Atmega328 used in production
js wrote:For a production line you don't want anyone typing anything to program chips, use Keyfob programmers which are loaded with the necessary code and all the operator is...
Thursday, 29 August 2013 - 03:03
Advantages of ASF over Arduino libraries
clawson wrote:They aren't as easy. They are designed for doing real work not just playing. Do you mean that Arduino libraries are not suited for real work? Rather worried as I...
Wednesday, 22 May 2013 - 03:15
Advantages of ASF over Arduino libraries
clawson wrote:But ASF does have a lot of support for M3 and M4 chips doesn't it? Good. This means that for M3 chips, developers can choose either using ASF or Arduino libraries. I...
Friday, 17 May 2013 - 03:14

Pages