Post Created date
AS prompting .. that file is "already open. Do you want to close it?"
I found it: under Tools->Options->File Extension, I had enabled an option for .c files which I just Removed. That shut off the annoying offer to close the file, and also the...
Thursday, 20 August 2015 - 12:53
AS prompting .. that file is "already open. Do you want to close it?"
The file it offers to close is the one I'm asking AS to bring to the front. If you have more files open than fit across the tab bar, you can't see where the file you want is all...
Thursday, 20 August 2015 - 12:44
Problem with detecting AVR Dragon
Where does the "fickleness" come from? Timing parameters too tight? I'm having a problem getting my main system to recognize the DRAGON after I did an update. I'm using my travel...
Friday, 5 June 2015 - 19:23
AVRDragon Fails in AS v6.1.2730+SP2 running on W7 pro 32bit
I'm having a problem after attempting an update; I was prompted in AS6 that updates were available.   Now, my AVR Dragon no longer is showing up as a device in AS6. I've just...
Friday, 5 June 2015 - 17:18
lock bit in xmega
I found the problem. This is a duplicate explanation from another thread.   In the larger context of my environment, I was dumping a status history gathered in the I2C driver...
Friday, 29 May 2015 - 19:29
debugging in atmel studio 6.0 or above
I found the problem.   In the larger context of my environment, I was dumping a status history gathered in the I2C driver and THE CURRENT STATUS of the interface in my...
Friday, 29 May 2015 - 19:29
debugging in atmel studio 6.0 or above
It looks as though that RIEN bit is still set after the failure. Interrupts are occurring, but that one stops.   Doing a data breakpoint doesn't detect anything: I tested for...
Thursday, 28 May 2015 - 23:14
ATxmega128A1 software CRC that matches hardware CRC
For the almost last word in CRC's, see: http://www.tty1.net/pycrc/ madGambol  
Thursday, 28 May 2015 - 19:20
lock bit in xmega
madGambol wrote: ...snip The mystery is: why doesn't the interrupt trigger? ...snip   That's the last of many successful i2c reads, hence the mystery. madGambol  
Thursday, 28 May 2015 - 19:13
lock bit in xmega
That's good information, but I don't think its explains my problem.   I'm doing a read, and the interrupt that should complete the i2c action and take the last byte doesn't...
Thursday, 28 May 2015 - 17:49
debugging in atmel studio 6.0 or above
I have a debugging technique question. I'm using an ATXMEGA128A1 (not U) with an AVR Dragon on the ETT dev board.   I have a bug (or bugs) that I'm struggling with. Something...
Thursday, 28 May 2015 - 16:25
avr-c++ micro how-to
What the dickens is Student-Lockroom programming?  madGambol  
Thursday, 28 May 2015 - 14:59

Pages