Post Created date
AVR Analog Comparator Interrupt Problems
Ok please provide me link for proteus bugless version.
Monday, 3 February 2014 - 19:31
AVR Analog Comparator Interrupt Problems
I have no problem with proteus now but problem is ADMUX =0x01; is not selected.
Monday, 3 February 2014 - 18:35
AVR Analog Comparator Interrupt Problems
Lajon wrote:Well it works for me (tested with a mega8, not simulated). /Lars Please kindly attach its simulation.
Monday, 3 February 2014 - 18:28
AVR Analog Comparator Interrupt Problems
Simulation on proteus.
Monday, 3 February 2014 - 18:13
AVR Analog Comparator Interrupt Problems
Please let me know that what is the purpose of .lss file. Over-Volt-Protect.elf: file format elf32-avr Sections: Idx Name Size VMA LMA File off...
Monday, 3 February 2014 - 17:42
AVR Analog Comparator Interrupt Problems
Sorry ATmega8 at 8MHz internal oscillator. AVR Studio 4. EDIT: Please see attached pictures when I connect channel 0 to input the LED on and comparator accurately makes comparison...
Monday, 3 February 2014 - 17:07
AVR Analog Comparator Interrupt Problems
#include #include unsigned char i; int main(void) { DDRD |= 0x01; ADCSRA &= ~(1<<ADEN); // disable ADC ACSR = 0x00; // enable comparator SFIOR...
Monday, 3 February 2014 - 15:15
AVR Analog Comparator Interrupt Problems
Dear to all , Please understand my code what do I want. I am not being clearly saying.... I know there is one comparator and one task can perform at a time. But Ok you tell me how...
Sunday, 2 February 2014 - 21:11
AVR Analog Comparator Interrupt Problems
Quote:void switchChannel (uint8_t channel) { ADMUX = channel & 0x07; __asm ("NOP"); __asm ("NOP"); } Dear theusch, When switchChannel function reads channel=0 00000000 00000111...
Sunday, 2 February 2014 - 20:59
AVR Analog Comparator Interrupt Problems
Quote:and then you say,So what should I do for reading three ADC channel Dear ka7ehk, It means Comparator uses ADC channel instead of AIN1 pin when set ACME in SFIOR.
Saturday, 1 February 2014 - 22:16
AVR Analog Comparator Interrupt Problems
No ADC is not necessary,comparator is only concern. If I set 2.5V on AIN0 and ADC channel 0 reading 2.5V then ACO bit change.This is done very well.But when I select channel 1...
Saturday, 1 February 2014 - 22:12
AVR Analog Comparator Interrupt Problems
theusch wrote:First it was seven channels simultaneously; now it is apparently three channels sequentially. Dear theusch, Firstly I was only learning that how channels are handle...
Saturday, 1 February 2014 - 21:17

Pages