Discussion Title | Created date |
---|---|
LTC1966 for AC Current Measuring Please let me know that how can I calibrate LTC1966 RMS-to-DC Convertor IC for measuring AC current by using CT x/5A. |
Thursday, 28 August 2014 - 12:40 |
Measuring Current Using ZXCT1041 IC I make attached circuit but it cannot amplify AC signal of 300mVAC to approx. ~3VDC. And datasheet says its gain is 10. |
Saturday, 23 August 2014 - 17:16 |
Display Float Value on three 7-segment display Hello, I am using ATmega16 @8MHz internal oscillator and its 10-bit ADC. I want to display floating value on three number of 7-segment display. for example. if ADC_pin looks 100mV... |
Thursday, 17 July 2014 - 16:07 |
RS485 interface with ATmega16 Please let me know that how to interface RS485 with Atmega16? |
Tuesday, 20 May 2014 - 15:57 |
Timer1 interrupt use as delay function Please let me know that can we use timer1 interrupt instead of using delay_ms function to generate different delays. |
Thursday, 8 May 2014 - 20:27 |
Stepper Motor interface with ATmega Please let me know what is the connections of stepper motor,I saw 4-wire and 6-wire stepper motor,what is the difference? |
Saturday, 15 February 2014 - 20:35 |
AC Motor Soft Starter using ATmega Please let me know that the theory of AC motor soft starter using TRIAC by ATmega(any). Some basic points ,hints notes. |
Tuesday, 4 February 2014 - 21:37 |
USBasp cannot detect by PC Please let me know that I bought USBasp Programmer from aliexpress but when connect to computer it cannot detect it and USB not recognised balloon appears. I have installed its... |
Monday, 3 February 2014 - 21:37 |
AVR Analog Comparator Interrupt Problems Please let me know that how to use multiple channel interrupt using analog comparator.I make a program but it is reading only Channel 0. I need to read all seven channels... |
Friday, 31 January 2014 - 21:03 |
Ammeter signal conditioning Please let me know that signal conditioning need for Ammeter. I saw in the Ammeter "MAKE:FOTEK" a wire is wound only one round and input signal is pass through that wire. 1)What... |
Thursday, 30 January 2014 - 16:25 |
External Vref of ATmega8 Please let me know that how to set and enable external Vref for ADC(AREF) and how to compare external and internal values. |
Tuesday, 28 January 2014 - 20:55 |
PCB Design Please let me know how make home-made PCB in good quality. As like as attached file. |
Saturday, 25 January 2014 - 16:58 |