Type in the full discussion title or a part of it.
Discussion Title Created date
ATmega8 jammed during burning hex file
Please let me know my ATmega8 disabling burning hex file.I am using USBasp and Khazama AVR programmer. When I set Reset bit in the fuse bits then further burning stopped and...
Friday, 24 January 2014 - 23:18
ATmega8 ADC interrupt
Please let me know that how to enable channel 0 to 7 of ADC using ADC interrupt. I have to connect four sensors to ADC channel but want to use ADC interrupt. Please can anyone...
Friday, 24 January 2014 - 12:43
Hall Effect Sensor interface with ATmega8
Please let me know that how to interface Hall Effect Sensor with ATmega8 for measuring AC/DC Current. During experiment, I have Hall Sensor 44E, but it cannot work on my atmega8,...
Wednesday, 22 January 2014 - 01:14
Hex file size and uC memory
Please let me know that where the hex file is store in the flash,SRAM or EEPROM. And how to recognize the size micro-controller according to memory size. Program: 4062 bytes (...
Monday, 20 January 2014 - 14:16
ATmega8 intefacing 7-seg. display multiplexed for voltmeter
Please let me know I wrote 7-segment display code in AVR studio 4 ATmega8 at internal 8MHz. The given below code not showing digits,please find there any mistake or mistakes....
Tuesday, 14 January 2014 - 11:30
Power Factor Contoller design using ATmega8,32,48, etc.
Please let me know that I want to make Power Factor Controller circuit by using ATmega series MCU. Can anyone interested to tell me how to design and theory behind sensing of...
Saturday, 11 January 2014 - 00:45
Please let me know I make this attached circuit for ATmega8 based voltmeter but reading is displaying only first one rest of the two digits are not standing they are up/down...
Wednesday, 8 January 2014 - 05:27
PortD of ATmega8 cannot work properly
Can anyone interested to tell me why PORTD cannot work properly code is given please tell me? #include #include #include #include "buttondebounce.h" unsigned char n,p;...
Monday, 6 January 2014 - 21:29
Button Debounce Program of ATmega8
Please tell me any mistake in below program, it can not generate 1 sec delay. #include #include #include #define Red 240 #define Yellow 232 //#define Blue unsigned char...
Thursday, 2 January 2014 - 18:05
Functions needed for ATmega644
Please let me know that what is the working of given below functions and how to make it or where I find its functions void init_mcu(void); void debounce_machine(void); I have...
Saturday, 26 January 2013 - 20:15
Beginning AVR`s
Please let me know that how to program AVR and its programmer and compiler.Can anyone interested to tell me?
Saturday, 15 December 2012 - 22:22