Type in the full discussion title or a part of it.
Discussion Title Created date
LTC1966 for AC Current Measuring
Please let me know that how can I calibrate LTC1966 RMS-to-DC Convertor IC for measuring AC current by using CT x/5A.
Thursday, 28 August 2014 - 12:40
Measuring Current Using ZXCT1041 IC
I make attached circuit but it cannot amplify AC signal of 300mVAC to approx. ~3VDC. And datasheet says its gain is 10.
Saturday, 23 August 2014 - 17:16
Display Float Value on three 7-segment display
Hello, I am using ATmega16 @8MHz internal oscillator and its 10-bit ADC. I want to display floating value on three number of 7-segment display. for example. if ADC_pin looks 100mV...
Thursday, 17 July 2014 - 16:07
RS485 interface with ATmega16
Please let me know that how to interface RS485 with Atmega16?
Tuesday, 20 May 2014 - 15:57
Timer1 interrupt use as delay function
Please let me know that can we use timer1 interrupt instead of using delay_ms function to generate different delays.
Thursday, 8 May 2014 - 20:27
Stepper Motor interface with ATmega
Please let me know what is the connections of stepper motor,I saw 4-wire and 6-wire stepper motor,what is the difference?
Saturday, 15 February 2014 - 20:35
AC Motor Soft Starter using ATmega
Please let me know that the theory of AC motor soft starter using TRIAC by ATmega(any). Some basic points ,hints notes.
Tuesday, 4 February 2014 - 21:37
USBasp cannot detect by PC
Please let me know that I bought USBasp Programmer from aliexpress but when connect to computer it cannot detect it and USB not recognised balloon appears. I have installed its...
Monday, 3 February 2014 - 21:37
AVR Analog Comparator Interrupt Problems
Please let me know that how to use multiple channel interrupt using analog comparator.I make a program but it is reading only Channel 0. I need to read all seven channels...
Friday, 31 January 2014 - 21:03
Ammeter signal conditioning
Please let me know that signal conditioning need for Ammeter. I saw in the Ammeter "MAKE:FOTEK" a wire is wound only one round and input signal is pass through that wire. 1)What...
Thursday, 30 January 2014 - 16:25
External Vref of ATmega8
Please let me know that how to set and enable external Vref for ADC(AREF) and how to compare external and internal values.
Tuesday, 28 January 2014 - 20:55
PCB Design
Please let me know how make home-made PCB in good quality. As like as attached file.
Saturday, 25 January 2014 - 16:58

Pages