Type in the full discussion title or a part of it.
Discussion Title Created date
Transition to ST7789
Has anyone successfully transitioned from The ILI9341 to the ST7789V using ASF  and the SMC in a SAM4S?
Friday, 14 June 2019 - 12:51
SAM4S Bootloader
I am using a SAM4SD32. I would like to enable the end user to update flash using the ROM bootloader. For various hardware reasons re-booting into the bootloader is not possible....
Friday, 26 October 2018 - 14:41
Arduino Uno Rev3 and mega328p UART at 115200 baud
When sending serial data to the Arduino UNO board via USB it seems that the RXC0 bit was sometimes set before the data was actually ready in the UDR0 register. There were no...
Thursday, 27 December 2012 - 19:39
Odd incorrect code generated by GCC
Can anyone explain the code generated by the compiler for the relatively simple C statement? And how to correct it. I am using the default Studio 6 settings. SPCR &= !(1<...
Friday, 21 December 2012 - 20:52
Few modules appear in ASF Wizard
I have just installed Studio V6 from the Atmel web site. The Extension Manager prompted me to install ASF 3.5.1 (I had installed 3.5.0 with the Studio), which I did. My issue is...
Wednesday, 12 December 2012 - 16:42