Post Created date
Atmel ICE -- waste of money??
You put a lot of blame on the ICE where the culprit is either the compiler, Studio or the target circuit (Arduino). And the claim that the ICE is no better than the Xplained is...
Sunday, 3 February 2019 - 01:00
Set a timer interrupt to fire every 1ms or so. Inside the ISR: If the button is pressed, increase a counter. When the button isn't pressed and the counter isn't zero, see how high...
Wednesday, 26 December 2018 - 21:05
mobile phone to AVR
If this is for main lighting, I suppose you might want to have more than one device controlling it. Therefore I wouldn't use Bluetooth, as usually one slave can't have more than...
Tuesday, 11 December 2018 - 21:23
Looking for IoT advice.
Do you need to do it with a browser and webpage? If all you want is remotely writing to the serial interface you already have, a simple telnet server on the ESP8266 could be...
Saturday, 3 November 2018 - 18:08
How do I wire a PKE antenna (inductive transmitter) to my arduino?
sparrow2 wrote: Everyone that suggest ultrasound (or any sound), should think about the noise the prop make!   That's why I made the comment about using the same...
Sunday, 23 September 2018 - 15:50
How To Avoid Forced Reload of software for debug session?
I just tested it for the fun of it, my PC takes 20 seconds to start AS7 and load a small project. Specs: i7 4790k at 4 GHz 12 GB DDR3 RAM at 1600 MHz Z97 mainboard chipset Samsung...
Sunday, 23 September 2018 - 13:41
How do I wire a PKE antenna (inductive transmitter) to my arduino?
I'd go with acoustics and a scheme that allows identification between sender and receiver, like addressing and different frequencies, maybe even even automatic channel hopping....
Sunday, 23 September 2018 - 13:30
serial buffer conflict
Oh and as this part of the code does probably not dependent on the physical environment, I recommend developing it on a PC. There you have better debugging support and memory...
Monday, 10 September 2018 - 13:12
serial buffer conflict
You're throwing around a lot of pointers and mentioned that going from local to global declarations made the problem go away temporarily. This leads me to one big question: Are...
Monday, 10 September 2018 - 13:07
What is the best way to connect a USB keyboard?
avrcdc wrote:it would be a pain to migrate to ARM You posted in the Arduino forum, which leads me to believe you will work neither on the register level nor use assembler. If this...
Monday, 27 August 2018 - 20:23
XMEGA USB on a Mac?
I am fairly certain that Atmel's ASF code for CDC USB is fully class compliant. The "special" driver is only necessary because Windows can't make sense of the VID/PID otherwise....
Sunday, 19 August 2018 - 23:15
Quick check if 5110 LCD is alive?
Someone mentioned my name in the zombie thread, well here I am. If you need C code, drop me a line here. I have something in my stash.
Tuesday, 14 August 2018 - 20:30