Type in the full discussion title or a part of it.
Discussion Title Created date
2313 vs tiny26
I'm fairly newbie at AVR's & uc's in general. I'm just using BASCOM at this point and toying with a couple of 2313's. I want the advantage of the ADC's and the internall...
Thursday, 19 February 2004 - 16:42
what happened to mcselec.com?
Anyone know www.mcselec.com (the maker of BASCOM) has gone? The site is down and emails have been returned. I know last year his site went down while he was on holidays. It's...
Monday, 5 January 2004 - 17:10
sleep and ATtiny15
Hello fellow freaks, I am working on a simple remote control, which should use the sleep instruction. After a interrupt, it should wake up, send some code via IR, return from the...
Saturday, 27 December 2003 - 19:13
Trim internal RC Oscillator for fast EEPROM acess with Mega
Hi everybody, my problem describes as follow: The acess time for the internal EEPROM of my Mega8 is quite high (8ms). Now i have read about that cause the internal RC Oscilator....
Friday, 19 December 2003 - 10:28
BASCOM & tiny26 serial interface
Any bascom users out there that know if I can use the standard serial and uart commands with the tiny26. The datasheet says the tiny26 uses a universal serial interface. How...
Tuesday, 16 December 2003 - 19:50
AVR Assembler 1.73 - Warning caused of redefinition of regi
I got problems with the new Assembler 1.73. I redefine registers like R23 with the command .DEF in subroutines and get warnings like "Register already defined by the .DEF...
Tuesday, 9 December 2003 - 10:08
global variables in relocated sections
A while ago I asked a question about why I was getting a section type conflict when I relocated my boot section. It appears the problem has to do with trying to put global...
Monday, 10 November 2003 - 15:28
section type conflict for bootloader
I've got a bootloader that works fine and am trying to combine it in a build with my main program. I have added the following to the makefile: LDFLAGS+=-Wl,--section-start=....
Thursday, 6 November 2003 - 00:36
PCMCIA HW watchdog?
I'd like to build a hw watchdog for my laptop. Does anybody knows if its possible by using the pcmcia port? Or how could I archive this??? TIA marc
Saturday, 25 October 2003 - 14:34
What is the difference between UART (2313) and USI (tiny26)? How would the implementation differ for 1-wire parts (DS18S20)? Would I need a max232 chip for use in something like...
Tuesday, 7 October 2003 - 15:16
Newbie & Timer prescaler
Just a point of clarification. I assume that with an 8 bit timer on a 2313 at 4Mhz with the prescaler set at one I would trigger a timer interrupt at 4000000/256 (every 64...
Monday, 6 October 2003 - 19:35
problem with strcpy
I have just upgraded from AVR3.2 to AVR3.3 (the winavr released 9/13) I am seeing some strange behavior in strcpy that seems to be new. I don't know if I'm doing something wrong...
Thursday, 25 September 2003 - 18:18