Type in the full discussion title or a part of it.
Discussion Title Created date
AS7 throws dialog about backend communication failure whenever it doesn't have focus, and locks up occasionally when it does.
I've tried repairing the install, and setting the backend timeout to 32768 in options, which is the highest value they'll allow me to set it to. Setting it to 0 doesn't disable it...
Friday, 22 February 2019 - 05:03
Is there any reason why a USB bootloader compiled for the SAMD21G18A would not work on the SAMD21E17A?
I'm having trouble getting the Arduino Zero bootloader to work on a board I designed.    I have been able to upload the SAM-BA bootloader found here to the board: (At...
Friday, 1 April 2016 - 01:10
Need help getting SAMD21E17 to function
I've designed a very simple open hardware breakout for the SAMD21E17 thinking I could simply load the Arduino Zero bootloader onto it and everything would work fine with a little...
Sunday, 28 February 2016 - 07:43
How can I convert a .HEX file to an .ELF file?
I have Atmel Studio 6.2.  I've read they removed an option to save ELF files that was in AS4.  I'd rather not install an old version to convert one file.   My...
Tuesday, 11 August 2015 - 20:48
The Neutrino - A miniaturized version of the Arduinio Zero
Hey guys,   I saw some discussion of the Zero here and I thought you'd like to see my latest design: https://www.kickstarter.com/projects/rabidprototypes/neutrino-the-tiny-32...
Friday, 1 May 2015 - 14:06
Trying to get Xmegaduino working with A3BU-XPLAINED
I'm trying to get XmegaDuino working with the A3BU-Xplained board which has at atxmega256a3bu on it, and there's a whole lot I don't understand about the process. I can't even...
Tuesday, 17 June 2014 - 09:18
Using non-precompiled Arduino libraries in AS6
So I'm thinking about using an Xmega for my next project. It's faster than a mega. Has a couple DACs, which I need for sound. Runs on 3.3v so I can interface directly with an SD...
Sunday, 15 June 2014 - 20:09
Is it possible to upgrade firmware in field from USB drive?
Hey guys, I was wondering if the default firmware on an Xmega can load the firmware from a file on a USB drive or if that would even be feasible to implement. I'm aware you can...
Thursday, 5 June 2014 - 18:24
Does the xmega pause when booting?
I purchased an Arduino Micro a while back from Adafruit. It uses an Atmega32U4, and you program it via USB. When you power it up there's a significant pause before it begins...
Tuesday, 6 May 2014 - 02:29
USB requires 48mhz clock?
I'm a little confused on how USB works on the Xmega. Is it possible to use the internal 32mhz clock to clock the processor at 32mhz while also using USB for communication? I think...
Sunday, 20 April 2014 - 07:23
DAC capacitance?
http://www.atmel.com/Images/Atme... On page 97 of the datasheet, in the electrical section it states that the minimum resistance load is 1K ohms, and the maximum capacitance load...
Saturday, 12 April 2014 - 05:06
Does xmega A series require resistors on the USB data lines?
I've been working on a board which will use an xmega A series processor, and when the time came to add the USB port to my schematic, I looked at a lot of different schematics for...
Friday, 11 April 2014 - 05:38

Pages