Post Created date
Setting Pin to Input Delievering Unexpected Results
Make sense, thanks a lot!
Monday, 8 October 2012 - 13:59
Setting Pin to Input Delievering Unexpected Results
Alright, I'll bite. I switched to a 16 MHz crystal, and it works now. Yeesh, I guess it was too imprecise with the internal 1 MHz eh? Do you know why, and how I can identify this...
Monday, 8 October 2012 - 01:00
Setting Pin to Input Delievering Unexpected Results
ChaunceyGardiner wrote:What does USARTWriteChar() do, then ? It's defined in main.c like this: void USARTWriteChar(char data) { //Wait untill the transmitter is ready...
Monday, 8 October 2012 - 00:19
Setting Pin to Input Delievering Unexpected Results
ChaunceyGardiner wrote:The delay functions will work pretty much the same when you change F_CPU to match your uC/fuses, but other things may need to be changed too. E.g. the...
Sunday, 7 October 2012 - 23:44
Setting Pin to Input Delievering Unexpected Results
Thanks guys, so using PINC instead of PORTC did get me further. But it still doesn't seem to be working. I have a hunch that my clock speed might be an issue. This code was...
Sunday, 7 October 2012 - 22:37
Getting undefined ref error, suspecting Makefile [solved]
Thanks a bunch!
Sunday, 7 October 2012 - 17:13
About to set fuse bits for the first time
clawson wrote:Quote: I hope to write more useful tutorials in the near future too If you do consider adding them to the Tutorial Forum here. While some tutorials there just have...
Wednesday, 29 August 2012 - 11:43
About to set fuse bits for the first time
Hey Bill, Thanks, I'm very glad too! And thanks a lot for pointing out those silly mistakes! I didn't get enough time to edit it yet, but really appreciate you pointing them out....
Wednesday, 29 August 2012 - 11:11
About to set fuse bits for the first time
Here's a link to a little tutorial I created to help others out with this procedure: http://www.treehouseprojects.ca/... Enjoy!
Tuesday, 28 August 2012 - 18:43
About to set fuse bits for the first time
Hi Bill, Thanks for your kind answer, I really appreciate it. Yes, I do see the convenience factor associated with using hex values, and will definitely use them in the future....
Tuesday, 28 August 2012 - 00:25
About to set fuse bits for the first time
clawson wrote:Well say you read high fuse and it is 0xCB then the key thing is that bit 7 is never changed to 0 so don't program any value below 0x80. If you wanted to change the...
Monday, 27 August 2012 - 19:10
About to set fuse bits for the first time
clawson wrote:As always it's probably worth reading Recovering from a "locked out" AVR to know what you might be up against. The key thing really is don't change RSTDISBL so...
Monday, 27 August 2012 - 18:02

Pages