Post Created date
Questions about HT7333
A couple of points here... use the HT7333 because it is low loss (170mV loss) and uses low quiescent power 4us - VERY different to some of the more popular chips - and it is CHEAP...
Thursday, 19 October 2017 - 22:04
Timers on Atmega1284 (and the like)
I wonder if someone can help - ATMEGA1284   I found this code to provide a couple of 16 bit Analog out functions for the Arduino.   /* Configure digital pins 9 and 10 as...
Thursday, 28 July 2016 - 20:34
Mega1284p Usart receiver issues [SOLVED]
The resistor and cap are not the solution - changing the crystal mode from low power to full swing completely eradicates the problem - permanently.
Sunday, 27 April 2014 - 19:05
USBasp firmware for ATmega328
At this early stage (I'm using Windows) - I have NO idea how to recompile the code for the 328 - I've not used the make files or associated tools. I do have an AVR dragon to put...
Thursday, 12 July 2012 - 13:37
Dragon and AVRStudio 6 - won't program
david.prentice wrote:Where did you buy your chip? What were the fuses set for? Yes. I would be annoyed if the chip does not obey the data sheet (i.e. supplied factory fuses for...
Monday, 9 July 2012 - 15:25
Dragon and AVRStudio 6 - won't program
david.prentice wrote:scargill wrote:In a wild moment of fantasy I wondered to myself why no clock source, how can it operate without a clock, so I stuck a 16 meg Xtal into the...
Monday, 9 July 2012 - 15:02
Dragon and AVRStudio 6 - won't program
mailtosarathy wrote:Try installing the Atmel Studio patch :) I did that thanks - so all up to...
Monday, 9 July 2012 - 15:00
Dragon and AVRStudio 6 - won't program
So I don't understand.. if there is a possibility you might be putting chips in there which are already programmed for external Xtal - why don't Atmel in the docs say that you...
Monday, 9 July 2012 - 13:36
Dragon and AVRStudio 6 - won't program
Ok, so I'm fairly new to this (Dragon and AVR Studio) so take it easy with me guys... I spent hours this morning looking on the web to find countless people having problems with...
Sunday, 8 July 2012 - 09:47
Dragon and AVRStudio 6 - won't program
I've installed the extension manager update and the ARMGCC update. Can't find reference to DLL or any other updates.
Saturday, 7 July 2012 - 18:13
Dragon and AVRStudio 6 - won't program
More info - ISP mode, connections as per Studio 6 manual for device sheet SCKT3200D2... using the USB power. When I click the "device signature" button the 2 lights on he Dragon...
Saturday, 7 July 2012 - 18:00