Type in the full discussion title or a part of it.
Discussion Title Created date
evk1100 control panel dirver uncheck
i am learning Control panel application in EVK1100 with Atmel studio6 and it works fine. i do not want ethernet and lcd unit for my custom control panel application. For...
Thursday, 11 October 2012 - 11:07
usb msc implementation
i am doing my own application with at32uc30512 and AS6, as well as i newly entering usb communication. so for that i have tried usb-msc application ASF in AS6 with my own board.it...
Monday, 1 October 2012 - 11:31
SMC timings
Tools : Atmel Studio 6. i designed my own application SMC interfaced with SRAM. write operation is successful, but while reading a SRAM problem happened. i find out this...
Thursday, 27 September 2012 - 15:19
module number
i am working in atmel studio 6 with EVK1100. i want to enable seperate clock for some selected module(usart,pba,pbb). so i want module number for usart,pba...how can i find module...
Monday, 17 September 2012 - 10:12
stdio support for usart in avr studio 6
i have experience with usart but i don't know stdio support for USART. I am using studio 6 with EVK1100 board and i saw a example project in ASF in studio 6. But when i was trying...
Tuesday, 11 September 2012 - 08:52
gpio set option not working
i am trying set gpio pin in EVK1100 by avr studio 6. Toggle and clear options are working fine but gpio_set_gpio_pin option make me worrying. my code is shown below: while(1...
Friday, 7 September 2012 - 11:28
AT32uc3a0512 device undection
I developed my design for uc3a0512 with data flash AT45DB642D-TU and Atmel Studio6. The h/w communication has been done as like as EVK1100 board and i used SPI0 instead of SPI1....
Thursday, 6 September 2012 - 15:14
failed to signature reading
i am using evk1100 with avrdragon. i tried read device signature but it shows error message like "unable to read a device information and unable enter into programming mode". i...
Thursday, 6 September 2012 - 04:45
linker example
i am unable to understand the linker option, so could any tell me where the linker examples available for avr studio's ?
Monday, 20 August 2012 - 12:07
execute code from external SDRAM
i am using AS6 with evk1100 board and i want to execute code from external sdram. All examples given for AVR32 studio, but i did not use 32studio till now. How can i implement...
Tuesday, 14 August 2012 - 04:33
dfu bootloader configuration word
i am using EVK1100 board with avr dragon debugger i tried dfu-usb bootloader with application, i have doubt in configuration word,because firmware does not update again,so could...
Friday, 3 August 2012 - 09:25
usb not recognize
i have tried duf-usb bootloader example in avr studio6 but the file given for avr32 studio.i changed options with respect to studio6. code programmed successfully,user page and...
Friday, 3 August 2012 - 03:55

Pages