Type in the full discussion title or a part of it.
Discussion Title Created date
Memory Region Lock
i started my project with at32uc3 and interfacing with external SRAM capacity of 1mb. In sram i want to allocate half 512kb for storing input values and another 512kb for storing...
Thursday, 3 April 2014 - 08:06
Source file not compiled
Hi, i started my project in Atxmega128d3 with Atmel studio 6 for small application. But later i need more flash area so i changed my device to Atxmega256d3. Everything...
Thursday, 21 November 2013 - 12:19
Master Spi with Two slaves
Hi, i am using at32uc3a and atmel studio6 for my custom board. Previously i interfaced with one spi slave(atmel flash chips), but i want to add interface for FRAM device....
Saturday, 22 June 2013 - 14:04
st7565 8bit interface library
I am working in atmega8 parallel interface with ST7565R(128X64) dot matrix display.St7565R contain single chip lcd controller but most of the library coded for dual chip...
Sunday, 28 April 2013 - 03:00
Freertos Semaphore creation
Hi, i am using atmel studio 6 with Freertos v7 for my custom board which contains AT32uc3a0512. In my project i want synchronization between tasks for that i should block a task...
Tuesday, 12 March 2013 - 08:25
FreeRTOS enabling in atmel studio 6
hi, i am working with evk1100 with atmel studio 6. when i try add FreeRTOS support to my own project, i unable to done it, as soon as i checked the example project the...
Thursday, 21 February 2013 - 07:25
Avrdragon programming mode error
I am using Atmel studio6, AvrDragon and custom board which contains at32uc3a0512. Last fourth months i used this same tool for programming and debugging. Recently i purchased...
Saturday, 9 February 2013 - 06:28
SSC configure with DMA in at32uc3a
I have application for receiving data from master ARM device through dma controller and SSC controller in at32uc3a0512 with atmel studio6. I got guidance from this site http://www...
Thursday, 29 November 2012 - 14:02
rtos struck with stdio
I started Usb-msc with Freertos example in studio6 ASF(2.11.1 and 3.5.0)on EVK1100 board. It works fine with default application, then i added stdio serial support to the same...
Saturday, 24 November 2012 - 07:39
ASF version changing
previously i was working atmel studio 6 with asf of 2.11.1, then i switched to atmel studio6 service pack-2. This has been done successfully. i am working on standard i/o...
Tuesday, 20 November 2012 - 11:51
expected '=', ',', ';', 'asm' or '__attribute__' error
i am working with my own application on atmel studio 6, custom board(at32uc3a0512). my application for sram, usb communication. i added necessary asf and definition. while...
Monday, 19 November 2012 - 07:09
Adding ASF to Solution
i tried usb-cdc ASF example in studio6, its compiled and executed well. Then i launched my own application as same as usb-cdc. The problem came up during compilation what it is...
Wednesday, 7 November 2012 - 09:35

Pages