Post Created date
atapi cd-rom
hi cliff if by atapi-ide specification you mean sf-8020, then yes, i have it, and i found it very useful. Just that the project i used didn't work out of the box and i did't want...
Thursday, 20 February 2014 - 11:05
atapi cd-rom
well it worked i managed to open a tray. It seems that registers must be initialised after soft reset as well, which i did not do.
Thursday, 20 February 2014 - 10:25
atapi cd-rom
in specs it also says "The ATAPI CD-ROM Drive shall generate a unit attention whenever the ATAPI CD-ROM Drive has been reset by a hard reset condition, or by a power-on reset."...
Wednesday, 19 February 2014 - 18:41
atapi cd-rom
hi again, now i am having some problems with sending command packets, most of commands doesn't work and when i check error register and sense keys i get "ATAPI CD-ROM Drive reset...
Wednesday, 19 February 2014 - 18:32
atapi cd-rom
hi jepael, if cs0(/CS1FX) is command register pin and cs1(/CS3FX ) - control, then i think i get it and one of the sites has unfairly tricked me.
Saturday, 8 February 2014 - 20:54
atapi cd-rom
well, i found some projects and also i found atapi reference d1532v2r1a, however, i am still confused with asserting/negating command and control registers. Could somebody please...
Saturday, 8 February 2014 - 19:43
vcc monitoring usb
Then i'll probably use power-save, because it allows timer2(this is mega16). Thanks Jim.
Tuesday, 17 September 2013 - 20:26
ds1337 address
It worked, thank you :D ds1337 data is in bcd and somehow unintentionally i started to use it with addresses too.
Thursday, 5 September 2013 - 10:25
v-usb adc
This was probably a false alarm, i tried everything again and it takes aproximately the same amount of time to load with and without adc and that small loading lag is probably for...
Friday, 16 August 2013 - 03:35
v-usb adc
Simonetta Sorry for not mentioning, i use mega16 with 12MHz speed. By lagging i mean that it takes maybe half of second to start working instead of right away when i don't use adc...
Friday, 16 August 2013 - 03:14
srec_cat basic
thanks a lot, it works now and thanks for the links too.
Wednesday, 12 June 2013 - 18:15
data memory usage
eecsninja wrote:How do you install the extension manually? The extension manager in AS6 only lists Atmel Gallery. I also could not install the VSIX file by opening it -- it said...
Saturday, 4 May 2013 - 14:52