Post Created date
run arduino mega 2560 at lower speed
thanks guys
Friday, 17 August 2012 - 12:23
JTAGICE3 problem after install arduino usb driver?
I just found out, for some reason, the ISP Clock is set to 7kHz at AS5.1/AS6, after setting it back to 13.45 kHz in AVR5.1/AVR6, it works again. But after plug in the Arduino, the...
Friday, 17 August 2012 - 11:15
how to include a library
Thanks Cliff I got it sorted by try and error after read all the other responds, but you explanation gave me a brief introduction on how and why, that's very helpful information...
Wednesday, 15 August 2012 - 08:33
how to include a library
Thanks for all your help, I got it sort it :)
Wednesday, 15 August 2012 - 08:27
how to include a library
indianajones11 wrote: See my tutorial on including files if you don't know what I'm talking about. I still don't follow, can you provide a link to your tutorial on including files...
Tuesday, 14 August 2012 - 22:35
how to include a library
Thanks for all the responds, so I think I did it the wrong way, so how should it be done properly?? what should I google for? or better yet, a link to tutorial or some sort?...
Tuesday, 14 August 2012 - 19:36
how to include a library
clawson wrote:Quote: and it doesn't work You didn't actually say what "doesn't work" but I suspect you got link errors such as "undefined reference to LCD_init" and similar? This...
Tuesday, 14 August 2012 - 19:32
how to include a library
Judicael wrote:Hello, Are you sure that lcd.c is compiled ? If you use WinAVR, you must explicitly add lcd.c to the list of your sources files in the Makefile. Can you show us the...
Tuesday, 14 August 2012 - 19:31
unknow error [solved: used type before typedef]
oh I see, thanks :)
Monday, 6 August 2012 - 01:04
introduction to reading digital data for beginner
Hi Kartman Thanks for your feedback, but I don't quite follow. If you are talking about the dht11StartSignal() function, the data sheet say pulling up is the MCU signal. Zhuhua...
Sunday, 5 August 2012 - 23:18
how to check if a digital input is pulled low for xx us
Hi Levenkay this method is a bit over my head at the moment as I don't know much about the serial communication thing, but I will sure to try it, your help is much appreciated....
Sunday, 5 August 2012 - 11:16
how to check if a digital input is pulled low for xx us
thanks for everyone's advice, I finally can read the data from the dht11 sensor, I have uploaded my source code to here:
Sunday, 5 August 2012 - 11:13