Type in the full discussion title or a part of it.
Discussion Title Created date
SAMV71 Software Pack ISI example
I have the SAMV71 Xplained Ultra board, the Atmel Maxtouch LCD, and a OV5640 camera module. I connected everything and run the software package ISI example. I saw the LCD display...
Friday, 2 December 2016 - 11:59
SAMV71 Software Pack Getting Start Question
I am testing the SAMV71 software pack getting start example with the SAMV71 Xplained Ultra board. Part of the code is: #ifndef NO_PUSHBUTTON printf("Configure buttons with...
Tuesday, 15 November 2016 - 10:29
Camera Module used in SAMV71 ISI example
I have bought a  SAMV71 Xplained Ultra evaluation board and the maxTouch Xplained Pro LCD from Atmel. I also has a OV5640 camera module which I bought from another...
Monday, 14 November 2016 - 11:11
[Closed]SAMV71: Failed when building the Software Package
I have downloaded the software package for the SAMV71 here: http://www.atmel.com/tools/samv71-samv70-same70-sams70-software-package.aspx   And I want to test the ISI example...
Sunday, 13 November 2016 - 10:38
Programming Hex File by Atmel Studio 7 Problem
I have recently updated the Atmel Studio from 6.2 to 7. My PC OS is Windows 7. After finished the installation, I try to program the MCU (SAMD20J18) with a hex file by the "Device...
Thursday, 3 December 2015 - 08:10
Hex File Format Question
Hi I am working on a bootloader and an application code for a microcontroller. I have finished both and they generated two seperated hex files. I know I can cascade the...
Thursday, 19 March 2015 - 02:02
How to download both bootloader and firmware to the MCU?
I have written a bootloader and a firmware. The bootload process is software started. That means we do not have a button to start the bootloader. Instead, after power on, it...
Thursday, 11 December 2014 - 01:51
How to place application firmware after the bootloader section?
I am using the ASF example "SPI_MASTER_BOOTLOADER" as my bootloader reference. This bootloader require the application software to be generated with starting address as 0x4000. I...
Thursday, 4 December 2014 - 18:41
How to use "long long" variable?
I am using SAMD20J18 (M0+ MCU) and Atmel Studio 6.2. I have a hex number which consists of 5 bytes: 0xEEDDCCBBAA. This number is stored in an array: [0xEE 0xDD, 0xCC, 0xBB, 0xAA...
Monday, 10 November 2014 - 12:48
Debug with printing message in Atmel Studio
I am using the SAM D20 microcontroller with Atmel Studio 6.2. As I am also using a RTOS (FreeRTOS) in the software, it is very difficult to debug by using the ...
Friday, 17 October 2014 - 01:31
How to use the same SERCOM for both SPI and UART
I found that I have to use the same SERCOM for both SPI and UART interface. They will not operate simultaneously, so I think I can reset the SERCOM to serve another interface when...
Wednesday, 17 September 2014 - 13:41
How to assign serial number to the MCU?
I want to assign serial number to my product which is using ATSAMD20J18. I do not want to use the original serial number embedded in the MCU, I want to use my own format. What is...
Tuesday, 16 September 2014 - 01:14

Pages