Type in the full discussion title or a part of it.
Discussion Title Created date
AVR ISP MKII Programmer Dead
It just randomly stopped working today, no LED's, tried different USB port, tried different cord, tried different computer... has anyone had this problem? Time for a new...
Friday, 30 May 2014 - 03:12
Atmel Sam4L
Hey guys, I didn't know where to put this being that there is no ARM subforum. I purchased the Atmel Sam4L xplained pro and I'm looking for a good starting point... I have pretty...
Friday, 9 May 2014 - 16:26
Next step after ATtiny & ATmega
I don't know if this is the best place to put this. I've been working with the ATtiny25/45/85 and ATmega8/32 for a while doing lots of motion control, lighting, frequency...
Tuesday, 10 December 2013 - 21:35
External Interrupt Atmega32
Hey guys, I'm working on a project involving encoders and I'm trying to get an external interrupt going. This should be a pretty simple task, I feel like I'm missing something...
Saturday, 5 October 2013 - 20:43
"Unable to enter programming mode." AS6
Hello, I'm not new to AVR devices but I'm new to AS6 and need a little help. Typically I use AVRA, avr-gcc and AVRdude running on my Debian machine. I am using an AVRISP mkii...
Friday, 6 September 2013 - 21:59
LTC1864 Help
I'm looking for an ADC to sample an audio input and have a few questions. First off, I have purchased a LTC1864, it will be used to sample line level audio (2 channel) but I'm not...
Monday, 2 September 2013 - 03:18
Dynamically Linking Functions
I don't know the proper name for this task, or if it even has a name. Essentially I would like use a atmega32 to take compiled hex off an SD card, put that in the program space,...
Tuesday, 20 August 2013 - 22:12
ADC / DAC Resolution
I'm working on DSP project and would like to know the optimal resolution DAC & ADC for sampling music and then reproducing it. I know I should be running 48.1kHz but am unsure...
Friday, 16 August 2013 - 21:09
8bit Hex to 7-segment
Hey guys, this is the first thing I have done with any microcontrollers so far. I have some knowledge in C and lots in electronics. I wrote a piece of code to convert 8bits of...
Thursday, 5 April 2012 - 02:42