Type in the full discussion title or a part of it.
Discussion Title Created date
How to collect ADC data from more than 1 channel?
Hello there I am trying to take in the ADC converted values from 2 sources (call them X and Y) using Atemga64 I am using TIMER1 to toggle betweent these 2 ADC channels (X == MUX1...
Wednesday, 25 July 2012 - 09:16
please explain difference between PINA and PORT A address
Hello there I am a newbie and I am working on mega128 ...I have this confusion for addresses ...the datasheet mentions the PORT A Input addresses and PORT A address.So I would...
Sunday, 22 July 2012 - 04:49
PWM generation not working
Hi there I am a newbie trying to implement the PWM functionality of a ATega64,the code is as below I am not able to get the desired PWM on PORT E's pin 5 that is OCR3C... Can...
Tuesday, 10 July 2012 - 13:44
Implementing a system timer for ATGMEGA
Hello there I am a newbie now trying to get more deep in implementing code I have the following to be implemented on a ATmega64A based MCU 1) TIMER/COUNTER0 (8 - bit) - Used for...
Friday, 29 June 2012 - 06:50
Implementing Output Compare Mode
Hi there I am a newbie trying to implement the concept of Output Compare mode,I am using Atmega64A and ICR3 as the register for TOP value.I also need to generate the pulsewidth...
Monday, 18 June 2012 - 15:01
GPIO interrupt programming help needed
Hello there I am a newbie trying to code my own ISR routine/handler for the incoming edge triggered interrupt on PIN - 0 of PORTA i.e Pin PA0 precisely. The microcontroller I am...
Thursday, 7 June 2012 - 13:56
Timer4 - 1second generation fails
Hello there I am a newbie, I am trying to generate a 1 second delay,I am also printing the value on a debug terminal ..I have coded the issue in 2 ways - 1st - Autoreload and 2nd...
Tuesday, 22 May 2012 - 06:53