Post Created date
Moving from C to C++, weird issue
Could you put your code, at least for the step #2?
Tuesday, 3 September 2019 - 07:07
Use of ASSERT in AVR C programming?
clawson wrote:assert() only really works if there's some kind of stderr channel for it to output to which often isn't the case with AVR I define my own assert() to use in my code...
Friday, 9 August 2019 - 08:14
C AVR32_GCC compiler and compile time const (modulo optimization)
Your version is much better.
Monday, 1 July 2019 - 13:46
C AVR32_GCC compiler and compile time const (modulo optimization)
Craftplorer wrote:I wanted to use the % operator so the code is portable and can be used with sizes that are not of power of two. And if they are of power of two let the...
Monday, 1 July 2019 - 13:08
New to Atmel, looking for help analyzing why this program will not work properly
Your interrupt procedures doesn't save/restore timer registers. When you add code for this, the code will be still far from being correctly designed (never use delays in...
Tuesday, 4 June 2019 - 14:19
New to Atmel, looking for help analyzing why this program will not work properly
I think this is the scenario of your issue: 1. wait() in your main loop is running 2. An interrupt occurs. 3. The interrupt procedure calls wait() 4. The wait() called by the...
Tuesday, 4 June 2019 - 05:45
Unknown Identifier while debugging
Perhaps you are trying to watch Num instead of A.Num (in setup()) or this->Num or just this in (class Foo member functions).
Wednesday, 22 May 2019 - 05:26
programming on target micro with other micro
Brian Fairchild wrote:First you need to find an AVR with enough EEPROM to hold your program. Or you can locate your application in bootloader section and use FLASH instead of...
Wednesday, 15 May 2019 - 05:43
Get "this" reference into static pointer array
llisotti, the code you posted looks correct for me, so the issue is apparently in the part of the code you didn't post. Please post the complete code.
Monday, 30 April 2018 - 06:21
Really basic Ohms law question on an AC Circuit.
I would suggest using a resistor with less resistance. At 10 milliohm and 10 A of current, you get 1 W and 0.1 V on the resistor. Relatively low power and voltage high enough to...
Monday, 16 April 2018 - 08:30
Really basic Ohms law question on an AC Circuit.
Regarding resistance, did you measure resistance of one heating element, or resistance of whole circuit? Are you sure that all the heating elements are connected in series? Maybe...
Sunday, 15 April 2018 - 21:17
having bootloader but not starting through it
meslomp wrote: the power on time is critical as I have to set a certain IO line to a output high level in a very short time frame to keep the power supply ON. After that it is of...
Friday, 13 April 2018 - 07:06

Pages