Post Created date
LCD library for at32uc3c
https://github.com/aery32/aery32...
Sunday, 15 September 2013 - 16:27
Warning: input is not relaxable
"If GCC is used as a frontend for the linker, this option is automaticly passed to the linker when using -O2 or -O3" (AVR32006 p. 4)
Tuesday, 30 July 2013 - 15:00
AT32uc3c164, gpio togle speed.
1) Take a look into gpio_tgl_gpio_pin(). I'm sure you can find some fat there. 2) Use local bus to access to the gpio module. Here's an example from Aery32 framework, https://...
Friday, 19 July 2013 - 18:16
snprintf() performs very slow - Alternatives???
Hi sharkscream, you could try for example http://www.ijs.si/software/snpri...
Tuesday, 16 July 2013 - 18:41
Anybody get LUFA working with UC3B devices?
Avrfreaks' user bmtilm used one of my projects as an example to get LUFA working on UC3B, see https://www.avrfreaks.net/index.p...
Monday, 8 July 2013 - 16:02
[SOLVED] AT32UC3C Startup circuit problem
I guess that the default DFU bootloader supports only 12 MHz crystal oscillator connected between XIN0 and XOUT0, not external oscillator connected to XIN0.
Monday, 24 June 2013 - 19:44
books to learn avr
I'm afraid that there aren't any for Atmel Studio. For AVR in general google "avr book".
Saturday, 15 June 2013 - 14:34
Can't get LED's to blink on EVK-1101
Doug, did you ever test the smaller program I gave you above? I guess it didn't work?
Saturday, 8 June 2013 - 08:01
Can't get LED's to blink on EVK-1101
And how about the simple toggle LED on program I gave in above response before LDFLAGS-posting?
Friday, 7 June 2013 - 05:18
Can't get LED's to blink on EVK-1101
Hmm... I'm not sure if your LDFLAGS are correct. Maybe you could try with these: LDFLAGS = $(COMMON_FLAGS) \ -mpart=uc3b0256 \ -Wl,-Map=code.map \ -Tlscript.ld - What's $(...
Thursday, 6 June 2013 - 18:59
Can't get LED's to blink on EVK-1101
Hmm seems ok to me...should work. However, you could first try to switch just one LED on instead of blinking multiple. #incluce int main(void) { volatile avr32_gpio_port_t *...
Thursday, 6 June 2013 - 18:38
Can't get LED's to blink on EVK-1101
DouglasWolf wrote:For what it's worth... is it possible that the problem is that I'm not specifying a value for -march on the compile/link command line?-mpart=uc3b0256 already...
Thursday, 6 June 2013 - 16:50

Pages