Post Created date
How much protection in board-board power is appropriate?
daqq wrote:Thanks for the input! There will be a polarized connector on both ends of the cable. I think I'll add a polyswitch and a protection diode. Do yourself a favor and add...
Tuesday, 1 November 2011 - 21:58
ATmegaRFA1 and AVR Dragon
Thanks guys, I figured that would be the case was just making sure. One of the sites was Atmel's norway site, I'll try and make contact to let them know to update. http://support....
Monday, 26 September 2011 - 22:33
New to Zigbee, is it right for me?
Yup its a pretty simple project. Re polling period, I'd like to get round to each device every 10-20s but I could live with longer. Id be surprised if I couldn't make that...
Monday, 12 September 2011 - 00:13
New to Zigbee, is it right for me?
alexru wrote:What kind of traffic do you expect anyway? The requirements are pretty simple. Its basically a watchdog for 250-300 3rd party systems. Each node is aware of when...
Friday, 9 September 2011 - 04:45
New to Zigbee, is it right for me?
alexru wrote:300 routers located in one small room will generate lots of service traffic and depending on the scenario I would expect 5-10 minutes sending period for each node....
Thursday, 8 September 2011 - 22:37
New to Zigbee, is it right for me?
Hmm OK I'll have a look at the register set and see what the peripheral provides. And yes, technically it doesnt need to be "zigbee". Out of interest, if I did use the zigbee...
Thursday, 8 September 2011 - 06:29
New to Zigbee, is it right for me?
Thanks for the very quick reply Alex. How would writing my own application code help? I'm not sure exactly what's provided by the peripheral and what's provided by the SW stack,...
Thursday, 8 September 2011 - 05:47
OT: DSPs
Thanks for the link Jeff, Ill check it out. I figured that would be the case re JTAG. It just means Im looking at US$490 + US$1500 worth of bits to buy to get my own target board...
Monday, 26 September 2005 - 23:32
HELP!: AVR => PC 1,5MBit/s!!!!
The serial interface on the AVRs can get up that high but youll have trouble matching that on the PC side. Id definately go the FT245. They say it will get up to 1MByte / sec...
Sunday, 25 September 2005 - 23:08
AVR and Bluetooth
Ive just bought a few tiny embedded bluetooth module from Free2Move. Look pretty good, serial protocol to the AVR, internal antenna, and you change things like the name the...
Friday, 26 August 2005 - 02:24
AVR and Bluetooth
Ive just bought a few tiny embedded bluetooth module from Free2Move. Look pretty good, serial protocol to the AVR, internal antenna, and you change things like the name the...
Friday, 26 August 2005 - 02:24
KamAVR - free IDE for WinAVR tools
Yet another great job comment! This looks fantastic! Love the globals view! Pete
Thursday, 14 July 2005 - 01:36

Pages