TimerB driven from two different pins? Doesn't each timer (x = 0, 1, 2..) have A and B Output Compare Registers, OCRxA and OCRxB, and output compare pins OCxA and OCxB, so they will be running...
Semiconductor manufacturer symbol identification When I get parts I clip the part number out of the invoice and put it in a container with the parts. Otherwise I would never be able to find anything.
Friday, 20 May 2022 - 16:59
Semiconductor manufacturer symbol identification I have gotten chips where the number on the top of the chip is not the part number. I think Microchip likes to do that. I have had to go to the data sheet for...
Thursday, 19 May 2022 - 18:17
Solderable breadboards - thoughts? clawson wrote: seems the example project he's using as an example is 64 pots through 16-to-1 analog multiplexers! Almost exactly the same thing I was looking to do myself!!...
Monday, 16 May 2022 - 16:50
I2C newbee question I'm running my I2C with SCL_CLOCK = 400000L, and F_CPU = 16000000L with this to initialize. Is your F_CPU fast enough?...
Monday, 16 May 2022 - 00:36
I2C newbee question Hi Mike,
The ATmega 512 kbit EEPROM I have on that board i put the picture of up, has physical 128 byte blocks you cannot write across if you are just doing a write, write...
grohote wrote:Ever heard of the roton (the quantum of vortex movement)? I have. My office mate in graduate school was a many particle Bose condensate theory guy. I...
grohote wrote:Not possible, until current physics lays are changed Yeah, I know. Those pesky magnetic monopoles are hard to find and hold onto. ...
5nm is pretty amazing technology. Even more amazing, the metrology ellipsometers measuring the structures on the wafers use much longer wavelengths. Too short a...
Doesn't each timer (x = 0, 1, 2..) have A and B Output Compare Registers, OCRxA and OCRxB, and output compare pins OCxA and OCxB, so they will be running...
david.prentice wrote:So 5nm is more than 3 atoms. Yeah, but not a lot more. Four more cycles of Moore's law gets us to atomic size. I'm just wondering if you can make...
Intel is building 300mm fabs like crazy in the USofA too. 2024 is supposed to be down to 5nm. That's just 50 Angstroms. I wonder, can you make a FET with 3...
When I get parts I clip the part number out of the invoice and put it in a container with the parts. Otherwise I would never be able to find anything.
I have gotten chips where the number on the top of the chip is not the part number. I think Microchip likes to do that. I have had to go to the data sheet for...
clawson wrote: seems the example project he's using as an example is 64 pots through 16-to-1 analog multiplexers! Almost exactly the same thing I was looking to do myself!!...
I'm running my I2C with SCL_CLOCK = 400000L, and F_CPU = 16000000L with this to initialize. Is your F_CPU fast enough?...
Hi Mike, The ATmega 512 kbit EEPROM I have on that board i put the picture of up, has physical 128 byte blocks you cannot write across if you are just doing a write, write...
Here are a couple app notes that may be useful.
Pages