Type in the full discussion title or a part of it.
Discussion Title Created date
ISP - SPI resistors
Hello Gentlemen and Gentlewomen,   I am using the SPI bus to load data to an external device that uses the MOSI and SCK pins, and I am using the 6 ISP pins for my programmer...
Saturday, 17 December 2016 - 20:24
AVR to ARM threads
Can some nice person point me to threads discussing changing from AVR to ARM.  I am thinking it might be time for me to learn how to use an ARM, and I always have a hard time...
Friday, 2 December 2016 - 17:27
Why is BOOTSZ 2048 in a virgin ATmega328?
I don't understand why the BOOTSZ is set to 2048 and the BOOTRST fuse unchecked in a virgin ATmega328.  I would think I would want the BOOTSZ to be as small as possible to...
Wednesday, 7 September 2016 - 17:47
disabling interrupts inside an ISR
I am throwing an interrupt every 100 clock cycles on Timer0.  I am doing something inside the ISR that may take more than 100 cycles to complete.  Am I asking for ...
Thursday, 18 August 2016 - 18:20
touch screen stylus
I have a Winbook that has a touch screen and I have a stylus that doesn't work very well.  As the touch screen is capacitive, is there something I can do to the stylus, like...
Thursday, 7 April 2016 - 00:13
Linear Algebra Library in Atmel Studio 6.2
Hi Guys, I am using Atmel Studio 6.2 and need to solve 4 equations in 4 unknowns and am wondering if there is a linear algebra library out there I can include in my project so I...
Wednesday, 17 February 2016 - 18:30
Add as a link in AS 6.2
In a previous thread Clawson says   Quote: how to use a single "usart_routines.c" with several different projects. the "trick" is that when you "add existing" to add the...
Thursday, 7 May 2015 - 19:05
ICE - mega328 - breakpoint in ISR not being hit
Hi Guys,  hope everyone is well.   I just got my shiny new ICE from Mouser.  Atmel and Digi-Key both seem to be out of stock.  I am running one of my old...
Saturday, 25 April 2015 - 22:52
Looking for ICM7216C datasheet
Hi Guys, Does anyone have a datasheet for an Intersil ICM7216C frequency counter.  I have datasheets for the A, B, and D versions, and I have a pinout for all 4 versions...
Monday, 22 December 2014 - 19:02
Arduino libraries in Atmel Studio
Hi Guys, Never mind.  I found the answer.   This has probably been asked a million times before, so I am ready for some abuse.  Is there some way to include the...
Wednesday, 24 September 2014 - 16:18
Two questions: Macro definition and .elf vs. .hex
Hi Freaks, I am wondering why I sometimes see a macro written like: #define CHECKBIT(ADDRESS,BIT) (ADDRESS & (1<<BIT)) and sometimes like: #define CHECKBIT(ADDRESS,BIT...
Monday, 23 December 2013 - 15:18
Debugging and ATmega328P
Hi Guys, I am ready for some abuse. I probably should have searched a little more for the answer to my question, but the searches I did got me nowhere. Plus I am probably just...
Friday, 16 August 2013 - 17:23

Pages