Post Created date
7 Segment up/down counter with preset value
sushantsm3 wrote: I completed interfacing 7 segment display with atmega32 and up /down counter. Post the project here so everybody can take a look and help. MG
Wednesday, 17 January 2018 - 05:16
ATTiny25 + USBasp Programmer uploads the program but doesn´t run
You're using Arduino IDE and use assembly you wrote by yourself? Where you got that assembly file? I believe it's not your own work. How can you be certain that your code didn't...
Friday, 3 November 2017 - 09:23
problem with reading pin state using usart
You don't have brackets in your first if? . MG
Friday, 3 November 2017 - 03:05
Trouble getting 433mhz transmission/receiving setup properly
Tylerlee12 wrote:I see that the RFM12B is 915mhz No. There's 433MHz also. And other freq. The distance depends on the antenna choice. With about 7cm wire as antenna it will be...
Thursday, 2 November 2017 - 03:16
LUFA example enumerating as Unknown Device
If you still have time to do the research then please attach your 32U4 schematics (so I can set the ports of your needs) and the LUFA example you want to tweak (also which LUFA...
Thursday, 2 November 2017 - 03:00
LUFA example enumerating as Unknown Device
jgmdesign wrote:The problem is not he extension. It's the driver for windows. Jim The problem is somewhere in the code while handling the enumeration. So I don't think it's...
Wednesday, 1 November 2017 - 12:13
ultra high speed process control
Miramiro wrote: it works as buck when Vin > 5 volts and works as boost when the Vin...
Wednesday, 1 November 2017 - 06:56
Trouble getting 433mhz transmission/receiving setup properly
ashbrlmd wrote: Poor rf signal. nrf24l01+ is better. Thank you . MG
Wednesday, 1 November 2017 - 06:39
Trouble getting 433mhz transmission/receiving setup properly
Use RFM12B or nrf2401 . MG
Wednesday, 1 November 2017 - 06:21
LUFA example enumerating as Unknown Device
I always tell to anybody who use LUFA to use AS4 to do the job since it work flawlessly that way. But don't rely to my answer, it's IME. I don't think Dean still manage it till...
Wednesday, 1 November 2017 - 06:15
Coding adjustment for ATTiny13A, Charlieplexed LED Circuit
Well that's a cool animation of charlie confusing :) Confusing in programming and confusing in routing. . MG
Friday, 27 October 2017 - 10:03
Issues in driving servo through ULN2003A
Do you realize that powering servos using USB Port can damage the Port? . MG
Friday, 27 October 2017 - 06:56

Pages