Post Created date
2560 problem
No, big issues with the schematics. Should be some problem with soldering.. If the board is burning, then it must mostly be a partnership between Vcc and GND. So after checking...
Saturday, 9 February 2013 - 18:32
Trouble Programming an ATMega8 After Burning Low Fuse
js wrote:Quote: think my soldering is okayBut you have a "dry joint" on AVCC which powers half of the chip. You maybe lucky and have an older M8 which had a "silicon bug" and...
Saturday, 9 February 2013 - 18:20
problem of spi interfacing
Make MISO input...
Saturday, 9 February 2013 - 16:18
atprogram.exe giving errors
There you go!!! ;)
Friday, 8 February 2013 - 18:13
Optimized away problem in avr studio 6
make the variable a global variable instead of local one, then you will always be able to watch it... :O
Thursday, 7 February 2013 - 17:34
atprogram.exe giving errors
One another thing to check, Did you check whether the firmware in avrispmk2 is upgraded and it is compatible with the studio version you are using... Click on Tools Firmware...
Thursday, 7 February 2013 - 17:31
Installing AVR Studio 6
btw, it is rechristened as Atmel Studio 6, bcoz it can support both ARM and AVR devices ... :)
Thursday, 7 February 2013 - 17:24
RZ600?
Quote: "Flips works with the bootloader that is provided as part of the USB micro-controllers from Atmel. The device is RZ600 is not pre-programmed with this bootloader to support...
Thursday, 7 February 2013 - 17:19
Wireshark-RZ600USB stick issue
So jgmdesign. Is RZ600 firmware working for you know? If needed, I can compile the code for you and send...
Thursday, 7 February 2013 - 16:51
AD7327 interfacing with microcontroller
Along with the code, it will also be good if you can post your connection or wiring diagram...
Thursday, 7 February 2013 - 16:37
Protocol for transfering data/files between AVR and Android
If the data is going.to be that much simple. I will stick with very simple protocol Like this length | seq. No | command | checks And response like length| seq. No |...
Wednesday, 6 February 2013 - 15:49
Eric hits the big time
Yup. It will be really good to know more crazy and freak projects. Waiting for your follow up post EW!
Wednesday, 6 February 2013 - 15:24

Pages