Post Created date
Wireless Composer in Atmel Studio 6
and since wireless composer takes hold of the VCP, I would like to have a debug terminal in the wireless composer itself.. A specific pattern on teh command, and it redirects the...
Sunday, 2 June 2013 - 06:25
Wireless Composer in Atmel Studio 6
As a Wireless Composer User, I would like to use the wireless composer to send custom commands, I want to define a custom ccommand and send it thru VCP.. Of course, I can do it...
Sunday, 2 June 2013 - 06:18
Porting ATZB-24 code to ATmega128RFR2
Did you tried downloading the latest ASF . That will have some ready made examples
Tuesday, 21 May 2013 - 16:07
Atmega1284P USART
read the value at the register.. Convert it to ascii.. send it thru USART... ;)
Friday, 5 April 2013 - 17:30
Serial communication from Atmega16 to pc
Post the code, which you have for communicating over the UART. Probably that will help us. Do you have a level converter between the PC and the AVR? A connection/wiring diagram...
Tuesday, 26 March 2013 - 16:13
TWI (i2c)
If both the device supports I2C, there is no point in using 2 I2C cores. A single I2C module can support a whole lot of devices.. But still, a nice explanation of the goal will...
Tuesday, 26 March 2013 - 16:06
Serial port on PC to SPI on uC
you can get a microcontroller board something like arduino and write a USB to SPI bridge of your own. AVR ISP communicates over jungo.
Saturday, 16 March 2013 - 17:13
Help with ASCII to morse code encoder
what is the value in _morsetab[0]? The algo looks good in essentials... Probably if needed, we can move the delays to hardware using timers than using the _delay_ms() functions
Saturday, 16 March 2013 - 07:37
Newbie need help with Attiny85V
what is the RF section which is going to be used?
Saturday, 16 March 2013 - 04:12
ATMEGA328 USART Interrupt
do a sei() at the start of the main code. This will enable the global interrupts..
Saturday, 16 March 2013 - 03:08
Convert image file to data/array?
matlab. There is a function called imread to do this.
Wednesday, 13 March 2013 - 02:43
ATmega64M1 in QFN32 - connect bottom pad to ground?
connecting thermal pad to ground is very common so it can be done even if the datasheet doesn't tell it. btw, you connect it to the digital ground and I believe you have an...
Wednesday, 13 March 2013 - 02:37

Pages