Post Created date
Studio 6.1 on Win8.1 "no programmer", avrdbg.exe?
Can you please disable the antivirus for once and check that it is working (just to ensure, what if the antivirus got really scared about the Atmel stuffs and deleted it)
Saturday, 15 February 2014 - 14:29
SPI programming
In good old times, there used to be something called as Slave Select when the SPI is used in master mode.. this code doesnt even seem to care about that.. so better look for...
Saturday, 15 February 2014 - 14:22
Dead JTAGICE MkII needs factory bootloader
How did you manage to erase the bootloader? and why did you get the fancy idea of doing that?
Saturday, 15 February 2014 - 14:19
how to convert a intel hex file to raw data like memory view
You can see the OTA code or some generic bootloader... Please see these application notes from Atmel.. AVR2058 If BitCloud seems too complicated for you.. then we can probably...
Saturday, 15 February 2014 - 10:39
avrstudio 6 project examples
ASF has pretty decent example projects to work with.. You can select an example project based upon the board (atmel evaluation kit) you have and it works.
Saturday, 15 February 2014 - 10:25
Default TX output power of at86rf212
I think with Table 7-15 from the latest datasheet on atmel website.. We can know the power output of this guy...
Sunday, 9 February 2014 - 09:18
Zigbee Tranceiver and atmel AVR Controller
I think protocol is not what we are more interested in.. The approach should be like, we discuss the application and choose an appropriate protocol for that... If you have 2 nodes...
Sunday, 9 February 2014 - 09:12
Incrementing file names
"9 + 1 is :" in the micro world.. In the code treat the numbers always as integers.. I would suggest having something like this int file_name = 10; //convert it to ascii and...
Sunday, 2 February 2014 - 04:21
Peace be upon you. I have a problem in atmega32 uc
use this fuse calc to find out the values... We are not sure on what other settings you want.. so it is difficult to say the exact values..
Sunday, 2 February 2014 - 04:14
ATMEGA Programming
you can get an avrispmkii.. The cheapest and the most beautiful avr programmer on the world..
Sunday, 2 February 2014 - 04:14
Building and compiling project code using command line
go into debug/release folder and type make clean all..
Wednesday, 15 January 2014 - 03:59
Real time change value from USB wireless
Then I think you can use some AVR with USB capabilities.. Anything which ends with "U"... Then you can run the USB stack there and probably get it enumerated as CDC USB device so...
Wednesday, 15 January 2014 - 03:17