Post Created date
Combining LUFA and FATfs for USB drive
yes, it works correctly, thank you so much to great Dean!
Wednesday, 15 January 2014 - 17:34
Combining LUFA and FATfs for USB drive
and it return 1 on screen: result : 1 result : 1 that 1 Point to : FR_DISK_ERR, /* (1) A hard error occurred in the low level disk I/O layer */
Wednesday, 15 January 2014 - 15:54
Combining LUFA and FATfs for USB drive
I can run the demo for 8GB FLASH, Now i want to make file and write to it by FATFS, I add FATFS (last version of it has usbio.c file). and add this routin in MassStorageHost_Task(...
Wednesday, 15 January 2014 - 13:19
Combining LUFA and FATfs for USB drive
Thank you so much for your attention, It doesn't work and send this comment on screen: SCSI command error (Read Capacity). Quote: I haven't got any equipment here to test at...
Tuesday, 14 January 2014 - 22:15
Combining LUFA and FATfs for USB drive
Quote:Can you post the exact command and data you are sending? - Dean Twisted Evil I use LUFA-130901 and run this project: LUFA-130901\Demos\Host\LowLevel\MassStorageHost...
Tuesday, 14 January 2014 - 20:48
Combining LUFA and FATfs for USB drive
Hi Dean, I tried to communicate a 8GB FLASH to at90usb host, and modify your above codes here "My library's MS_Host_ReadDeviceCapacity() function issues a 32-bit READ CAPACITY (10...
Friday, 10 January 2014 - 04:22
Combining LUFA and FATfs for USB drive
abcminiuser wrote:It's too late (nearly 2AM) for me to test this, but it should work. When a mass storage device is inserted it should create a new blank file called "LUFA.txt" on...
Thursday, 4 October 2012 - 16:23
work with usb on at90usb162
oh, excuse me . i understand you'r intent,now! is it correct in make file for my request: LUFA library compile-time options and predefined tokens LUFA_OPTS = -D...
Thursday, 19 April 2012 - 11:24
work with usb on at90usb162
Quote: Use USB_OPT_REG_DISABLED: i write this code: USB_Init(USB_CurrentMode,USB_OPT_REG_DISABLED); but compiler give this error : VirtualSerial.c:186: error: too many...
Thursday, 19 April 2012 - 10:56
work with usb on at90usb162
hi dean thank you very much for answers. now,i want to use external 3.3v configuration , i know form data sheet that Set REGDIS bit in REGCR register but how to do this act in...
Thursday, 19 April 2012 - 09:41
work with usb on at90usb162
hi i find out an other thing! when i delete this blow function from main routin , CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); Is increased the speed of routin...
Tuesday, 17 April 2012 - 17:41
work with usb on at90usb162
and again, Hi Mr.Camera! in this part of you'r web tutorial saied, the USB_Init function have two input as blow: void USB_Init (const uint8_t Mode, const uint8_t Options)...
Tuesday, 17 April 2012 - 15:11

Pages