Post Created date
[Need Help] about tuxgraphic's makefile and schematics
I had the similar errors. Here is the solution. Just comment these 3 lines. CLKPR=(1<<CLKPCE); // change enable CLKPR=0; // "no pre-scaler"...
Sunday, 3 July 2011 - 08:27
Compilation error during array declaration.
I am using makefile to compile the code. Actually the code is of a web client on Atmega128 (little modified version of tuxgraphics code). http://tuxgraphics.com/electroni...
Saturday, 2 July 2011 - 16:48
Interfacing enc28j60 with Atmel STK600 Board
I have been using a locally made PCB with Atmega128 on it. I was running a web server on (after making few changes to Tuxgraphics code). It was working fine. now i wanted to...
Monday, 20 June 2011 - 07:06
Interfacing enc28j60 with Atmel STK600 Board
Thanks Indianajones11. I had figured it out to vary VCC with the help of Studio. But the problem now is: "STK600 doesn't have a separate SPI interface. ENC28j60 uses SPI...
Monday, 20 June 2011 - 06:41
[TUT] [C] Bit manipulation (AKA "Programming 101")
bloody-orc wrote:That means, that nr 1 is shifted left as many times as it is needed to reach bit named CS10. Where does the compiler know that CS10 is that? well you give him the...
Wednesday, 15 June 2011 - 11:59
Web client on Atmega128
thxs Kartman. But this arduino IDE is only for arduino boards and a limited no of Atmega chips. Using Tuxgraphics TCP stack, I wanted to implement the web client, without using...
Wednesday, 1 June 2011 - 07:38