Post Created date
New to ASF and I'm not getting it....:-(
rcinmo wrote:Wanted to report things are going much better. IMHO, there really needs to be a "User Board" Wizard that starts with chip selection then drills down into that chips...
Friday, 26 October 2012 - 20:44
XMEGA USART receive interrupt routine using ASF
ASF isn't a complete solution, it aids in the cross platform migration and compatibility. For example, asf would help in setting up your usart, but doesn't have callbacks...
Thursday, 30 August 2012 - 01:39
Seeking advice with Interrupts, USARTs.
Ah, think I've found it. Small omission from ASF documentation. Buffer array need to be passed by reference. I was passing in the start of the array and only filling it the...
Wednesday, 18 July 2012 - 03:20
Seeking advice with Interrupts, USARTs.
My first idea is that there is serious issues with the ASF FIFO implementation. Even with simple examples of using the FIFO as a buffer with USART RX/TX I'm getting strange...
Sunday, 15 July 2012 - 07:37
Seeking advice with Interrupts, USARTs.
WIRELESS_DRE_vect is just a #define WIRELESS_DRE_vect USARTD0_DRE_vect MCU is an XMega128A1
Sunday, 15 July 2012 - 05:43
load USART RX data into an array
You can also do this using a FIFO buffer that is found in ASF. ISR(USARTC0_RXC_vect){ switch(fifo_push_uint8_t(...
Wednesday, 11 July 2012 - 07:47
ASF3.3 release
Hey, what happened to the stdio_serial_init() in the stdio interface? How do I find the FATFS thirdparty directory in ASF?
Sunday, 8 July 2012 - 07:21
Atmel Developer’s Conference Sneak Peak!
I'm a professor and have students that want to go. $800 is almost an impossible number to reach. Not to mention hotels, food, transportation, etc... However, I do understand...
Friday, 22 June 2012 - 18:32
I need some words of encouragement
I do use the AVRStudio 6, but still enjoy the ease of interface with Mikroelektronika. I've found using MikroC is a great starting point for students as well.
Wednesday, 9 May 2012 - 04:08
Control frequency and duty cycle by AVR ??
Hello #MAAM#, First off, before I set out with frequency and duty numbers, I set the registers that control output and interrupts. I know its been suggested to start with Timer1,...
Sunday, 6 May 2012 - 23:16
I need some words of encouragement
Wanted to give you an update to my quest of becoming a proficient AVR warrior. Ended up concentrating on the MicroElektronika compiler for its ease of use. (writing my own...
Sunday, 6 May 2012 - 22:41
Atmel Developer’s Conference Sneak Peak!
Just returned to the USA to teach. Need to change my profile.
Sunday, 6 May 2012 - 22:28

Pages