Post Created date
C- pointer in embedded programming
harunduet wrote:westfw wrote:Quote:If anyone give an example code using c-pointer by using ATMEGA microcontroller uart_puts("Hello World"); Perhaps you are actually puzzled...
Saturday, 26 April 2014 - 07:27
C- pointer in embedded programming
westfw wrote:Quote:If anyone give an example code using c-pointer by using ATMEGA microcontroller uart_puts("Hello World"); Perhaps you are actually puzzled over "pointers to...
Saturday, 26 April 2014 - 07:24
C- pointer in embedded programming
I am from EEE background. As the lack of proper programming knowledge I am always thirsty to learn better programming technique. I am so much delighted to see your contribution to...
Saturday, 26 April 2014 - 07:04
USART interrupt using in a dynamic way (UQEnd,UQFront)
js wrote:In the past 3 years since you have been a member did you ever read this? :wink: https://www.avrfreaks.net/index.p... Thanks a lot. Now code is formatted.
Thursday, 10 April 2014 - 09:11
180 Byte take long arguments in eeprom_set_val() function
These are the functions I have written to fulfill my purpose. Not yet tested with hardware. *************************************************** Function description Time...
Sunday, 2 September 2012 - 11:02
EEPROM write delay
IS this the code(below) for acknowledge polling ? --------------------------------------------- TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN); while (!(TWCR...
Tuesday, 28 August 2012 - 10:56
1 sec timer using internal 8MHZ osc of ATMEGA-8
Dear DO1THL, Thanks for your comments. I know all the information are clearly documented in the manual. But if you help me to write the code(mS/Sec delay using 8MHZ internal osc)...
Tuesday, 14 August 2012 - 09:30
Building an avr clock
Dear bobgardner, You said: " 4x70 is about 300 digits a sec. 6x70 is about 400 digits a sec" Could you please elaborate that, what does it mean. AS I'm fetching the same problem...
Friday, 3 August 2012 - 04:02
digital alarm clock thermometer
Dear, See the attached image of the circuit diagram. Use timer overflow interrupt like this: ISR(TIMER1_OVF_vect) { if(++prescale == 225){prescale = 0;sec++;}; if(sec>59){min_1...
Wednesday, 1 August 2012 - 09:51
digital alarm clock thermometer
You can see this reference... http://www.engineersgarage.com/m... may be helpfull for you.
Wednesday, 25 July 2012 - 05:00
ATMEGA-128 programming problem
Dear Kartman, Thanks for reply. But I have used PDi and PD0 for programming. Although I have used those pins instead of miso mosi the problem arise.
Tuesday, 24 July 2012 - 08:16
Interfacing SRAM with ATMEGA128
Thanks, For your reply. sorry, the SRE will be 1. MCUCR = (1<<SRE)|(0<<SRW10); Could you tell me pls what should be at the place of "???" in the above statements for...
Wednesday, 4 January 2012 - 12:38