Post Created date
Atmel Studio 7.0.934/7.0.943
Got Studio 7 installed on this new Windows 10 computer and was able to import a Studio 4 ASP file and compile it with no errors.   Now have a HEX file on the computer that I...
Tuesday, 21 June 2016 - 04:37
CREATE A 8 BIT SERIAL STREAM FROM REGISTER
I am using PB0 thru PB2 as control lines to the SPI chip. Is USI port specific?  
Wednesday, 1 June 2016 - 07:37
CREATE A 8 BIT SERIAL STREAM FROM REGISTER
Thanks, that is what I needed.
Wednesday, 1 June 2016 - 06:14
ATTiny85 assembly code noobe problem
Thanks, that one has bit me in the arse in the past. Just need more practice.
Thursday, 5 July 2012 - 09:50
ATTiny85 assembly code noobe problem
What concerned me was if I was actually creating a 8 bit ADC value so I used the following subroutine and read the EEPROM value with my programmer to verify a voltage to 8 bit...
Thursday, 5 July 2012 - 09:30
Attiny26 PWM with timer and interrupt
Are you testing this on a software simulator or on a actual project board? If on a board you could be experiencing switch bounce causing your count to appear to skip?
Tuesday, 3 July 2012 - 07:30
Attiny26 PWM with timer and interrupt
Good question, I am trying to figure out the same thing on the ATTiny85 in assembly. Did you ever find your answer?
Tuesday, 3 July 2012 - 07:25
ATTiny85 PWM sweep question
I thought, maybe, that I needed to enable a timer interrupt so I added this at the start of the program but the result is the same. Sure hope some timer expert jumps in soon....
Tuesday, 3 July 2012 - 06:29
ATTiny85 PWM sweep question
John, I have one other related question. My circuit works and I can apply a DC voltage to the ADC input and see the PWM pulses change on my scope. The code shows what I am doing...
Monday, 2 July 2012 - 08:03
ATTiny85 PWM sweep question
Thanks John
Monday, 25 June 2012 - 04:05
ATTiny85 PWM Motor speed control newbie
Larry! Thank you very much. Sorry I did not respond sooner. I finally have some time tonight to go over the code and will let you know how it turns out. BTW I am using a ATTiny85...
Tuesday, 12 June 2012 - 03:36
[TUT] [C] Using AVR PWM Modes
I didn't see the BV relationship either, thanks for pointing it out.
Monday, 11 June 2012 - 09:33

Pages