Post Created date
Standalone firmware flasher for AVRISP MkII
Yes, that is exaclty the problem. Everyone uses Windows, because all the tools are for Windows, except those few widely homebrew used stuff. Time for microsoft to have another...
Monday, 4 November 2013 - 16:11
Standalone firmware flasher for AVRISP MkII
I 've found that the included "atprogram.exe" in AS6.1 can be called in one line for ATtiny10 TPI with AVRISP Mk2. AVRdude cannot utilize an unmodified AVRISP Mk2. It requires an...
Saturday, 2 November 2013 - 16:28
AVR freezing and reseting due to motor (maybe)
First mount decoupling capacitors! At least 10uF before and after the LDO, and 100nF next to all IC supply pins. http://en.wikipedia.org/wiki/Dec... Also, it is common when using...
Wednesday, 16 January 2013 - 19:14
[tiny10] Cannot increment byte above n
TIM0_OVF_vect is just a define for _VECTOR(4)... However, that was related due to missing specific header for tiny10. I'll look into __attribute__((always_inline)); I like...
Monday, 17 December 2012 - 12:26
[tiny10] Cannot increment byte above n
_VECTOR(4) was misspelled. Probably due to missing header. This problem is also fixed. Using tiny10 is an entire different world compared to a dual core cortex m4/m0... It feels...
Sunday, 16 December 2012 - 17:28
[tiny10] Cannot increment byte above n
As copied from about: Installed Packages: AVRAssembler - 2.1.51.64 AVR Assembler Version: 2.1.39.232 Installed Packages: AVRGCC - 3.4.1.95 AVR Toolchain 8 Bit Version: 3.4...
Sunday, 16 December 2012 - 15:55
[tiny10] Cannot increment byte above n
I'm using ASF 3.5.1 Using attribute as described above creates the following assember. int main(void){ 6c: cf 93 push r28 6e: df 93 push r29 70: 00 d0...
Sunday, 16 December 2012 - 15:37
[tiny10] Cannot increment byte above n
@westfw, I can find bga16 arm m0's c++ friendly, but pcb cost are too high. However, I removed ALL functions. And it seems working. Only one level of an inline function call is...
Sunday, 16 December 2012 - 13:44
Studio 4.18 install issues
The installer I've succesfully used since 2010 isn't working anymore either. I suspect the SP1 of Windows 7 is the problem. update: Safe mode works on Win 7 SP1 x86 and x64
Sunday, 1 April 2012 - 18:53
Do you need to connect both the Tx and the Rx pin?
At first, welcome ;) Now, it depends. Usually tx and rx are unbalanced signals. Requiring a common ground. So theoretically you can leave Rx or Tx not connected. At the price of...
Wednesday, 25 January 2012 - 15:13
Returning from interrupt routine
Any ansi-C teacher will tell you that using a return or break in the middle of a function is "prohibited". Altough it might function, it makes code more like basic, which is a...
Saturday, 14 January 2012 - 13:01
Bidirectional Optoisolator?
I think the 1.2 Volts occur because you make a memory circuit. Why 1.2 Volt? It is possibly a residue by imperfect components.
Saturday, 7 January 2012 - 15:21

Pages