Recording voice by Atmega32 sparrow2 wrote:
Then again which quality ?
just to understand
phone
HI-FI
?
What else does the mega16 do since you don't want to use it's ADC?
phone...
Sunday, 11 September 2016 - 09:52
Recording voice by Atmega32 sparrow2 wrote:
? does that mean that the microphone is digital? (if that is the case why not send the data direct to the PC).
or what do you mean with data ? ...
Sunday, 11 September 2016 - 09:02
Recording voice by Atmega32 Someguy22 wrote:
This is pointless because you are either going to use the ADC on a chip or the ADC on your AVR. You might as well use the AVR. This is well documented. Then you...
Sunday, 11 September 2016 - 08:48
Recording voice by Atmega32 sparrow2 wrote:
first question which quality of sound?
my purpose is recording data which send by microphone.
Sunday, 11 September 2016 - 08:42
Interrupt Problem in C++ Atmel Studio but there is not any application note which show how we can use ISR function in C++.
If you know any example or document please tel me.
thanks.
problem with wsnmonitor-bitcloud umamaheswary wrote:
I am also facing the same issue.The full address of coordinator in WSNMonitor is 0123456789ABCDEF.The coordinator is displayed in the WSN monitor.But the I...
Thursday, 19 May 2016 - 22:38
Freeze Up & ACS712 ki0bk wrote:
If you have a magnetic problem, then don't use a hall based sensor, take a look at a Max4173 to sense current, perhaps.
Thanks for your...
Tuesday, 12 April 2016 - 14:45
Freeze Up & ACS712 kheiri.saeid wrote:
I think the acs712 is good , because I use it for measure 3Phase current. But my problem is not solve yet.
I had same problem, as Kartman said...
Tuesday, 12 April 2016 - 13:59
Xmega Internal EEPROM thank you for your consideration.
but I found the solution :D
the avr1315 code working fine but in atmel studio when I reprogram my micro it clear my eeprom ! so i just propram...
Friday, 4 September 2015 - 12:12
AVRISP MK2 programmer in Windows 8.1 rolfdegen wrote:
Hi Joe
I have another programming adapter (AVRISP mk2) as you. I think the drivers are not the same.
Test following:
1. selected the driver and selected update
2...
Tuesday, 9 June 2015 - 16:48
lock bit in xmega clawson wrote:
I think
Based on what?
because I try this with xmega32A4u and it worked when I read that I got this code:
:...
sparrow2 wrote: Then again which quality ? just to understand phone HI-FI ? What else does the mega16 do since you don't want to use it's ADC? phone...
sparrow2 wrote: ? does that mean that the microphone is digital? (if that is the case why not send the data direct to the PC). or what do you mean with data ? ...
Someguy22 wrote: This is pointless because you are either going to use the ADC on a chip or the ADC on your AVR. You might as well use the AVR. This is well documented. Then you...
sparrow2 wrote: first question which quality of sound? my purpose is recording data which send by microphone.
but there is not any application note which show how we can use ISR function in C++. If you know any example or document please tel me. thanks.
Kartman wrote:I looked at the Arduino libraries for that answer. Could you please show me an example ? thank you
umamaheswary wrote: I am also facing the same issue.The full address of coordinator in WSNMonitor is 0123456789ABCDEF.The coordinator is displayed in the WSN monitor.But the I...
ki0bk wrote: If you have a magnetic problem, then don't use a hall based sensor, take a look at a Max4173 to sense current, perhaps. Thanks for your...
kheiri.saeid wrote: I think the acs712 is good , because I use it for measure 3Phase current. But my problem is not solve yet. I had same problem, as Kartman said...
thank you for your consideration. but I found the solution :D the avr1315 code working fine but in atmel studio when I reprogram my micro it clear my eeprom ! so i just propram...
rolfdegen wrote: Hi Joe I have another programming adapter (AVRISP mk2) as you. I think the drivers are not the same. Test following: 1. selected the driver and selected update 2...
clawson wrote: I think Based on what? because I try this with xmega32A4u and it worked when I read that I got this code: :...
Pages