Post Created date
WINC1500 Partial Socket Receive Calls
Agreed that is a real disadvantage, thanks for the quick reply, this isn't the end of the world for my use, at least the buffer isn't bigger haha
Sunday, 5 March 2017 - 21:20
frequency measurement, overflow interrupt odd
So to fix it, overflow should be set to 0 where TCNT1 is set 0 now? Quote:Your shared 16-bit variables should be accessed in main() with interrupts disabled. They are aren't they...
Monday, 8 October 2012 - 07:59
frequency measurement, overflow interrupt odd
#include #include void ginterrupt_enable(void); void start_measurements(void); void stop_measurements(void); unsigned int capture = 0, samples[250], overflowcount = 0,...
Monday, 8 October 2012 - 06:44
frequency measurement, overflow interrupt odd
Well clock frequency shouldnt matter for my question but it is running at 16 mHz no prescaler, normal mode running to 65,535 and then overflowing (and triggering shown overflow...
Monday, 8 October 2012 - 05:11
frequency measurement, overflow interrupt odd
Ok I can do that, but still why are my period overflows doubled?
Monday, 8 October 2012 - 04:01
ATMega128RFA1 Bitcloud Compilation Problems and Confusion
After a day of tinkering with it we were actually able to get something to work finally :). We also like that it includes a template application for start, the help file is much...
Saturday, 29 September 2012 - 12:15
ATMega128RFA1 Bitcloud Compilation Problems and Confusion
Zigbee is not a requirement in our project, we just basically need a wireless network of devices. Each of these devices can measure electrical power and communicate it to a...
Wednesday, 26 September 2012 - 21:34
ATMega128RFA1 Bitcloud Compilation Problems and Confusion
We are using BitCloud_MEGARF_1_14_0. The PMB in All_PMB_Atmega128rfa1_8Mhz_Gcc stands for Power Meter Board. We replaced STK600 with PMB (and renamed the directories accordingly...
Wednesday, 26 September 2012 - 13:26
Studio 6 imported project fuse problem
:?
Monday, 4 June 2012 - 13:41
Studio 6 imported project fuse problem
It's listed under dependency section, but I don't see that's it's been included in the main code anywhere.
Monday, 4 June 2012 - 13:16
ATMEGA128RFA1 Bitcloud, how to start a custom application
Ok thanks, that's what I was going to do if I couldn't do what I was asking. Thanks for the advice.
Friday, 11 May 2012 - 01:58
Opto isolating an SPI bus
Are there any potential problems I may encounter though?
Monday, 19 March 2012 - 03:22

Pages