Post Created date
Can internal regulator be used for single dataflash?
You have a lot to do before the current draw becomes the main worry, IMO. Solder up a rat's nest keeping test pins open for current measurements. Code for the most demanding data...
Saturday, 2 August 2008 - 02:31
The T2 SDE project - feedback?
This project caught my interest because the Blackfin must run uClinux (there is no MMU). AVR32 however can run the native kernel yet it T2 SDE doesn't show these differences to...
Saturday, 7 July 2007 - 17:15
Procyon AVRlib
bobgardner wrote:The commercial compiler I use has a place to enter a path to the include directories in the IDE. What's the latest IDE for the GCC compiler? Eclipse? AVRStudio?...
Friday, 18 May 2007 - 22:33
Procyon AVRlib
maverickmax wrote:Blimely, I am totally confused and lost. I am going to give it a break and come back to it tomorrow. It would be best for me to follow tutorials to use avrlib...
Friday, 18 May 2007 - 20:53
Simple Shift Register
ka7ehk wrote: There are quite a few shift registers in the 74C, 74HC, and 4000-series CMOS logic. Grab any of those data sheets (try Fairchild or ON-Semi). They explain what they...
Friday, 18 May 2007 - 20:35
Procyon AVRlib
maverickmax wrote:... produced 45 errors after compiling my codes... not really. probably just 1. don't panic. :wink:
Friday, 18 May 2007 - 20:24
Procyon AVRlib
maverickmax wrote: ... avr-gcc.exe -mmcu=atmega128 -Wall -gdwarf-2 -O0 -MD -MP -MT rprintftest.o -MF dep/rprintftest.o.d -c ../rprintftest.c In file included from ../...
Friday, 18 May 2007 - 20:22
Procyon AVRlib
relax, you'll get it. just not today.
Friday, 18 May 2007 - 17:55
digital audio SPI / I2S
Jesper's design is nice. I like my 20 year old HP function generator. i can troubleshoot a circuit without booting up the PC. OK, i see a post from CR in the GCC forum - you might...
Friday, 18 May 2007 - 16:11
digital audio SPI / I2S
either you must know the bit stream by sniffing the DAC input (using a logic analyzer) or figure a way to view the avr output another way and then hook up the amp after the bit...
Friday, 18 May 2007 - 02:35
digital audio SPI / I2S
OK, the dual channel is throwing me off center at first but isn't a big problem - it just halves your available thruput. you want mono, right? so you tie the WS pin low, or pull...
Friday, 18 May 2007 - 00:53
Procyon AVRlib
bobgardner wrote:... I guess Procyon did actually put all the compiled obj files in a library .a file, and you can too, but thats a more complicated extra couple of steps. and...
Friday, 18 May 2007 - 00:38

Pages