Post Created date
Lock boot loader section
Ok, thanks I got it. /Chotan
Saturday, 7 July 2012 - 19:14
Lock boot loader section
I'm using AVR Studio 4.19 and I have changed LockBits BLB1 as following image. Should I change other options, like BOOTRST in Fuses tab?
Saturday, 7 July 2012 - 16:00
downloading to Atmel Dataflash
Dean said: Quote:To begin a continuous read, execute DF_ContinuousReadEnable. For each 0x00 sent via SPI the next byte will be read from the dataflash until the enable line is...
Tuesday, 29 May 2012 - 22:12
R/W from AT45DB041D using ATmega16u4 through USB
No luck to change the ds1307 and twi codes. If I want to use BOARD = NONE what I have to remove? Any suggestions? /Chotan
Wednesday, 23 May 2012 - 20:43
R/W from AT45DB041D using ATmega16u4 through USB
Yes, I have done this, but I'm getting errors in "DS1307" and "TWI", so shall I comment off all these statements. /Chotan
Wednesday, 23 May 2012 - 16:45
R/W from AT45DB041D using ATmega16u4 through USB
My device is not supporting 12C so I have changed #LUFA_OPTS += -D DUMMY_RTC to LUFA_OPTS += -D USE_DUMMY_RTC Should I comment off all the statements of "DS1307" and "TWI", cause...
Wednesday, 23 May 2012 - 16:18
R/W from AT45DB041D using ATmega16u4 through USB
Thanks for your response and sharing the routines. I was trying "dflash.c", "Dataflash.zip" and "TempDataLogger". Better to concentrate one first. In "TempDataLogger" I have...
Wednesday, 23 May 2012 - 15:11
Compile LUFA Bootloader atmega32u2 error
Thanks Larry for your reply. I have done the Bootloader with JtagIce mkII programmer. But I want to know with the avrdude also. I installed the "libusb-win32-devel-filter-1.2.6.0....
Tuesday, 15 May 2012 - 12:08
[Tut][C][Code] LUFA & Studio5 - Beginner's Guide, Part 3
Thanks Chuck99 for your effort and nice tutorial. /Chotan
Friday, 11 May 2012 - 18:54
How I can understand LUFA DFU Bootloader is working?
Thanks Dean for your reply and support.
Wednesday, 9 May 2012 - 19:55
How I can understand LUFA DFU Bootloader is working?
Sorry, I forgot to mention but my comment on 11:37 PM (6th may'12) was based on Demos/Device/ClassDriver/Mouse/ this hex file, not for DFU , because in previous comment Dean told...
Monday, 7 May 2012 - 01:07
How I can understand LUFA DFU Bootloader is working?
The mouse from Demos/Device/ClassDriver/Mouse/ is working now, because after connecting the usb, the mouse cursor is going to bellow-right corner. But I don't have any control...
Sunday, 6 May 2012 - 22:46

Pages