Type in the full discussion title or a part of it.
Discussion Title Created date
How the ICE and/or Studio decides wether to use JTAG or PDI ? (if using devices with PDI AND JTAG, like XMEGA192A3)
Wednesday, 8 December 2010 - 21:10
XMEGA 192 A3 Studio 4.18 problem
Hi, I use the Studio 4.18 (SP3) and a ICEmkII... my (now very simple :-( Code shows the dollowing in the lss File: TxData[0]=48; 252: 80 e3 ldi r24, 0x30 ; 48 254: 89 83...
Tuesday, 7 December 2010 - 21:39
Adding compile time / date to hexfile
Hi ! I want to add automaticly the build time and date to my binary (so that I can read it out while running)... and perhaps a firmware version.... And if it's possible, the...
Friday, 26 March 2010 - 18:55
Adding raw binary file at specific adress in Flash
Hello ! I want to add a raw binary file to my code. Normally I use hex2bin/bin2hex to add the binary to the code, but then, AVR-Studio wouldn't programm it automaticly to the...
Friday, 26 March 2010 - 18:51
Bug in Studio ? Tiny 13 OC0A-Int wents wrong!
Hi ! I'm using Studio 4.12 SP3 and have problemns to simulate a Tiny13. The OC0A Interrupt is executed if the counter is 1 higher than the compare value. (e.g. OCR0A=3, then the...
Friday, 18 August 2006 - 11:59
Assembler interrupt routines in C
Hi folks, I want to (äh I must :( ) write an assember routine for the external Interrupt 0. It mus react as fast as possible, but the processor will be stopped after this routine...
Tuesday, 14 February 2006 - 14:01
Hi, I've a problem using the Progmem stuff: The following code works fine: #include #include #include const unsigned char SKB[] PROGMEM = {0,1,2,3}; void main(void...
Monday, 16 January 2006 - 11:03
AT90PWM3 headerfile
Hi anybody ! Anyone an idea where I can find a AT90PWM3 Headerfile for the AVR-GCC Compiler? :?: Andreas
Monday, 9 January 2006 - 12:46
MEGA128 UART Break problem
Hi ! In my project, a new frame of serial data will be started with a "break". A break is a low for more than ony byte. Data transfer speed is 250 kBit/s, 1 Start, 1Stop, 1 Parity...
Wednesday, 30 November 2005 - 11:22
AVR Studio 4.12 & STK500/ICE Box problem
Hi ! Since I've installed the Studio 4.12 (RC3), the progressbar for downloading software into the uC is missing. In Studio 4.10 it was there. Any suggestions?
Wednesday, 19 October 2005 - 16:16
FT245 as mem. mapped IO Device?
Because of pins running out ( the same problem every time...) I want to connect my FT245 as a memory mapped device. I have RAM at the ext. Memory Interface (128k, 2 Banks). I know...
Tuesday, 30 August 2005 - 08:49
AVR-GCC. How to remove Interrupt table?
Hi, I'm writing a bootloader (not interrupt driven) and need more program space. I set the flag in the makefile not to generate Interrupts.. It does it, but don't removed the...
Tuesday, 9 August 2005 - 09:39